Use the SF-ND2 to convert 2 channels of Dante to stereo AES/EBU or S/PDIF inputs of studio monitors or audio recorders without leaving the digital domain. The SF-ND2 is powered via PoE and offers selectable Dante Sample Rates of 44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz. The output is switch selectable to provide…
Troubleshoot a Dante™ Audio Network Using RDL SF-NH1 Headphone Amplifier
The SF-NH1 Dante enabled Stereo Headphone Amplifier can be used as a troubleshooting tool to quickly confirm that a port on a switch is properly configured for the Dante network simply by receiving audio.
Using Dante Controller, apply a static IP address to the amplifier and route an active audio signal to its Left and Right outputs. Connecting the PoE powered SF-NH1 to a network port and receiving audio will confirm that the port is properly configured.
The SF-NH1 is constructed in a steel enclosure. It is smaller than and weighs less than many digital multimeters. Accessories are available for mounting the headphone amplifier equipment racks, under counters or on microphone stands.