Home Page Product listing by category Reference materials, engineering tables, downloads, archives, terms and conditions Product Applications Introduction to application-specific modules A collection of technical tips about our products, troubleshooting and general RDL knowledge Contact Radio Design Labs Employment opportunities Dealer Login Radio Design Labs Banner banner.php

Please submit email address to receive our newsletter

Click to view our current newsletter
PRODUCT CATEGORIES > AUDIO > SWITCHING & CONTROL >
EZ Products Banner

ST-ACR1 Line-Level Audio Controlled Relay - 0.5 to 5 s

ST-ACR1 Line-Level Audio Controlled Relay - 0.5 to 5 s

Radio Design Labs - Line-Level Audio Controlled Relay - 0.5 to 5 s


How to buy this product

  • Switching Controlled by Audio Signal
  • Sensing of Line‑Level Signal
  • Silence Sensing
  • DPDT Switching Contacts
  • Open‑Collector SLAVE Output

The ST‑ACR1 is an Audio Controlled Relay in the STICK‑ON® series. These products are designed for quick, convenient installation, and reliable operation in a variety of control applications. The ST‑ACR1 is designed to switch on line level sources.

Two multiturn trimmers are provided. The SENS potentiometer adjusts the audio input sensitivity. A threshold LED facilitates accurate adjustment. The module can be set to trigger on signals between ‑30 dBu and 0 dBu. The DELAY control sets the time required for the relay to release when the audio drops below the threshold.

The delay adjustment range for the ST‑ACR1 is from 0.5 seconds to 5 seconds.

Typical Performance:

Audio Input:

10 kΩ balanced bridging

Input Connections:

May be connected balanced or unbalanced

Control Output:

Open‑collector @ 25 mA suitable to drive indicators or slave LCR relay

Indicators:

Audio threshold LED (for setting sensitivity)

Retrigger Delay:

250 ms

Contacts:

Double‑pole‑double‑throw

Max. Switching Power:

60 W, (220 Vdc,125 Vac, 2A)

Activation Response Time:

25 ms

Input Sensitivity:

‑30 dBu to 0 dBu (adjustable)

Relay Release Delay:

0.5 sec. to 5.0 sec. nominal (adjustable)

Power Requirement:

GROUND‑REFERENCED, 24 to 33 Vdc @ 50 mA*
* Assumes 20 mA max load at SLAVE output

Ambient Operating Environment:

0° C to 55° C


Switching Controlled by Audio Signal, Sensing of Line-Level Signal, Silence Sensing, DPDT Switching Contacts, Open-Collector SLAVE Output, The ST-ACR1 an Audio Controlled Relay in STICK-ON® series These products designed quick, convenient installation, reliable operation in variety of control applications ST-ACR1 designed to switch line level sources, Two multiturn trimmers provided SENS potentiometer adjusts audio input sensitivity threshold LED facilitates accurate adjustment module can set to trigger signals between -30 dBu 0 dBu DELAY control sets time required relay to release when audio drops below threshold, The delay adjustment range ST-ACR1 from 05 seconds to 5 seconds, format converter Data/Installation


Mounting Accessories:

Mounting Kit - RU, ST and TX SeriesMB-1
Mounting Kit - RU, ST and TX Series

Kit to Mount ST, TX Series Modules on FP PanelMB-3
Kit to Mount ST, TX Series Modules on FP Panel

Snap Rail Adapter - STICK-ON SeriesMSR-1
Snap Rail Adapter - STICK-ON Series

19" Universal Rack Chassis - RU, ST and TX SeriesRC-1U
19" Universal Rack Chassis - RU, ST and TX Series

19" Rack Mount for 3 RACK-UP Series ProductsRU-RA3A
19" Rack Mount for 3 RACK-UP Series Products

STICK-ON Mounting PlateSMK-12
STICK-ON Mounting Plate

STICK-ON Series 19" Mounting Rack - 10 modulesSR-10
STICK-ON Series 19" Mounting Rack - 10 modules

STICK-ON Series 19" Mounting Rack - 12 modulesSR-12A
STICK-ON Series 19" Mounting Rack - 12 modules

STICK-ON Series Mounting Rack - 7 modulesSR-4
STICK-ON Series Mounting Rack - 7 modules

STICK-ON Series 19" Racking System - 12 modulesSTR-19A
STICK-ON Series 19" Racking System - 12 modules

STICK-ON Series 19" Racking System - 10 modulesSTR-19B
STICK-ON Series 19" Racking System - 10 modules

Single Wide Enclosure - RACK-UP MountsUC-1
Single Wide Enclosure - RACK-UP Mounts

Double Wide Enclosure - RACK-UP MountsUC-2
Double Wide Enclosure - RACK-UP Mounts

Table Top Chassis for RU, ST and TX SeriesWDG1
Table Top Chassis for RU, ST and TX Series

STICK-ON DIN Rail Adapter - 1 moduleDRA-35S
STICK-ON DIN Rail Adapter - 1 module

STICK-ON DIN Rail Adapter - 6 modulesDRA-35S6
STICK-ON DIN Rail Adapter - 6 modules

Rear rack rail mounting kit for any STICK-ON moduleST-RRB1
Rear rack rail mounting kit for any STICK-ON module


General Accessories:

STICK-ON® Series Detachable Terminal BlockDTB
STICK-ON® Series Detachable Terminal Block

Jack Box - Dual RCA jacksACB-2
Jack Box - Dual RCA jacks


Related Products:

ST-ACR1M
Microphone Level Audio Controlled Relay - 0.5 to 5 s delay

ST-ACR2
Line-Level Audio Controlled Relay - 5 to 50 s delay


Home
Products
Reference
Applications
Introduction
Tech Tips
Contact us
Employment
Login
Sitemap

Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: June 23 2009

...