FP-AVDA4 Stereo Audio/Video Distribution Amplifier - 1x4

PRODUCT CATEGORIES > VIDEO > DISTRIBUTION >

FP-AVDA4 Stereo Audio/Video Distribution Amplifier - 1x4 - RCA Jacks

Radio Design Labs - Stereo Audio/Video Distribution Amplifier - 1x4 - RCA Jacks

Consumer Audio/Video Distribution
Four Outputs (Video + Stereo Audio)
Professional Quality Performance
75 Ω Video Input/Outputs
Unbalanced Audio Input/Outputs
Wideband Video – Flat to 10 MHz
Ultra‑Compact All Metal Construction

The FP‑AVDA4 is the ideal choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel phono jacks. The FP‑AVDA4 has a single 75 Ω input phono jack for the video signal and two phono jacks for the left and right audio inputs. Four source‑terminated, 75 Ω video outputs are provided on the video output phono jacks. Four stereo audio outputs are provided on phono jack pairs located adjacent to the corresponding video output. Unused outputs need not be terminated. Audio and video outputs are at unity gain.

Typical Performance:

VIDEO
Input:		Phono jack, 1 V p‑p
Input Impedance:		75 Ω
Gain:		Unity
Outputs (4):		Phono jack
Output Level:		1 V p‑p (into 75 Ω)
Frequency Response:		10 Hz to 10 MHz (+/‑ 0.2 dB)
Noise:		< ‑75 dB (below 1 V p‑p)
Output Isolation:		> 45 dB
Differential Gain:		0.1%
Differential Phase:		0.1 degree (measured at 10% and 90% APL)
AUDIO
Inputs (2):		Phono jacks (stereo), ‑10 dBV Unbalanced
Input Impedance:		10 kΩ, bridging
Gain:		Unity
Outputs (8):		Phono jacks (4 stereo)
Output Impedance:		150 Ω drives 10 kΩ lines
Frequency Response:		20 Hz to 40 kHz (+/‑ 0.25 dB)
THD+N:		< 0.05%; typ. 0.01% (1 kHz)
IMD:		< 0.02%
Output Level:		‑10 dBV
Headroom:		> 18 dB
Noise:		< ‑85 dB below –10 dBV
Crosstalk:		Better than 75 dB (20 Hz to 20 kHz); typ < ‑90 dB (1 kHz)
Power Requirement:		GROUND‑REFERENCED, 24 Vdc @ 60 mA
Dimensions:
		Height: 1.20 in. 3.05 cm
		Width: 3.25 in. 8.26 cm
		Length: 6.41 in. 16.28 cm
Ambient Operating Environment:		0° C to 55° C

Data/Installation

Mounting Accessories:

FP-RRA Rack Adapter FLAT-PAK Series - 19" Fixed	FP-RRAH Rack Adapter FLAT-PAK Series - 19" Hinged	DRA-35F FLAT-PAK DIN Rail Adapter
PM-1T Pole Mount Tray	PM-1V Pole Mount Adapter for FLAT-PAK Modules - Vertical

Related Products:

RU-VDA4
NTSC/PAL Video Distribution Amplifier - 1x4 - BNC

ST-DA3
Line Level Distribution Amplifier - 1x3

Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: June 23 2009

...