RDL®

ST-PA6

6 W Mono Audio Amplifier - 8 Ω

SKU: ST-PA6
  • 6 Watts RMS into 8 Ω
  • Amplifier with Balanced Audio Inputs
  • Built-In 2-Input Mixer
  • Low-Noise and Low-Distortion Amplifier
  • Amplifier with Loudness Equalization
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The ST-PA6 represents the second generation of RDLs® breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA6 offers 6 watts of power for a price you would expect to pay for 3 watts.

    The ST-PA6 features two balanced audio inputs, a gain control, equalization control and an 8 Ω output. The output is designed to deliver a clean 6 watts RMS into an 8 Ω speaker. Each input is a balanced bridge, with the two inputs actively mixed equally. This is particularly useful for monitoring a stereo line. The output stage features protection against short-circuits and thermal overload. The output protection automatically resets once the condition is removed, making fuse protection unnecessary.

    Specifications

    Inputs (2):100 kΩ balanced (may be wired balanced or unbalanced)
    Input Level:400 mV (RMS) minimum (for rated power output)
    Frequency Response:35 Hz to 20 kHz (± 1.5 dB w/EQ setting flat)
    Equalization:
    (Single-turn trimmer)
    Flat to +5 dB @ 60 Hz (center frequency of boost)
    Flat to +4 dB @ 100 Hz
    Flat to +3 dB @ 120 Hz
    THD+N:< 0.35%
    Noise:< -60 dB
    Output:8 Ω unbalanced, 6 watts RMS
    Ambient Operating Environment:0° C to 40° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 400 mA
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.205 lbs.
    WEEE weight:0.15 lbs.
    Tariff code:8543.70.9810

    Related Products

    Speakers and Active Speakers
    • D-SP1A

      2 Watt Decora-Style 8 Ohm Loudspeaker

    • DB-SP1A

      2 Watt Decora-Style 8 Ohm Loudspeaker

    • DG-SP1A

      2 Watt Decora-Style 8 Ohm Loudspeaker

    • DS-SP1A

      2 Watt Decora-Style 8 Ohm Loudspeaker

    Power Amplifiers
    • EZ-PA20

      20 W Stereo Audio Amplifier - 8 Ω, with Power Supply

    • FP-PA20

      20 W Mono Audio Amplifier - 8 Ω

    • FP-PA20A

      20 W Mono Audio Amplifier - 70 V or 100 V

    • RU-PA40D

      40 W Stereo Audio Amplifier with VCA - 8 Ω, with Power Supply

    • RU-PA518

      10 W Stereo / 18 W Mono Audio Amplifier - 8 Ω

    • ST-MA2

      2 W Mono Audio Amplifier with Muting - 8 Ω

    • ST-PA18

      18 W Mono Audio Amplifier - 8 Ω

    • ST-PA2

      2 W Mono Audio Amplifier - 8 Ω

    • TX-1W

      Music on Hold Amplifier - 1 Watt

    • TX-PA40D

      40 W Stereo Audio Amplifier - 8 Ω, with Power Supply

    Related Products

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    Dimensions

    ST-PA6

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.97 KBDXF
    Panel Diagram - EndAmerican3.21 KBDXF
    Panel Diagram - FrontAmerican85.1 KBDXF
    Panel Diagram - EndMetric3.14 KBDXF
    Panel Diagram - FrontMetric87.33 KBDXF
    High Res ImagesFormat
    st-pa6.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close