RDL®

ST-SSR1

Line-Level Audio Switch - 2x1

SKU: ST-SSR1
  • Switch Line Level Sources
  • Select Between Two Balanced Lines
  • Silent Audio Switching
  • Switching Without Hard Relay Contacts
  • Fast Switching for Audio Muting
  • Selection by Open-Collector Logic
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The ST-SSR1 was designed for absolute silent switching of audio signals. It supports two balanced line-level inputs and one balanced output. Each can be used unbalanced as well. The ST-SSR1 is perfect for switching between two input signals or as a silent On/Off switch for a single channel. Performance is in keeping with the technical standards for which RDL® has become known. The user can program the module for either fast or soft switching.

    The SELECT input feeds the OUTPUT when the TRIG terminal is grounded, otherwise the OUTPUT is fed by the NORMAL input.

    The control current required at the TRIG terminal is so minimal (< 0.5 mA) that the ST-SSR1 can be controlled from nearly any source from switches to logic circuits.

    The ST-SSR1 may be controlled using the RDL D-RC2ST or the D-RT2 remote controls.

    Specifications

    Inputs (2):20 kΩ balanced, +4 dBu nominal
    Audio Output:+4 dBu nominal, 150 Ω balanced, terminal block
    Switching Time:Fast    /    Soft
    Time required for NORMAL input to turn off:10 us   /    5 ms
    Time required for NORMAL input to turn on:15 us   /    70 ms
    Time required for SELECT input to turn off:15 us   /    10 ms
    Time required for SELECT input to turn on:20 us   /    35 ms
    Control Signal:TRIG terminal must be externally
    pulled to ground
    Control Current:0.5 mA
    THD+N:< 0.05%
    Frequency Response:15 Hz to 20 kHz (± 0.5 dB, bridging load)
    30 Hz to 20 kHz (± 0.5 dB, 600 Ω load)
    Noise (below +4 dBu): 18 dB
    CMRR> 45 dB (100 Hz, either port)
    ON Gain:Unity (600 Ω balanced input/output)
    OFF Attenuation:> 80 dB (10 Hz to 20 kHz, either input)
    Indicators (2):LED showing active input (left LED=NORMAL; right LED=SELECT)
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 40 mA
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.198 lbs.
    WEEE weight:0.145 lbs.
    Tariff code:8543.70.9860

    Related Products

    Switching & Control
    • ST-RX2

      Audio Routing Switcher - 1x2

    Related Products

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    Dimensions

    ST-SSR1

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.99 KBDXF
    Panel Diagram - EndAmerican3 KBDXF
    Panel Diagram - RearAmerican24.31 KBDXF
    Panel Diagram - EndMetric2.93 KBDXF
    Panel Diagram - FrontMetric25.26 KBDXF
    High Res ImagesFormat
    st-ssr1.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    Related Products

    • D-RT2

      Remote Control Selector

      Customizable Text

    • D-RC2ST

      2 Channel Remote Control for STICK-ON - Remote selection of audio or video sources

      Customizable Text

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close