| Recommended Power Supply ( Not Included ) | |
|---|---|
| PS-24AS (USA) | PS-24AX (International) |
The ST-VP1 is intended for voice-over paging with user adjusted and controlled FADE or CUT between two input sources. This unit is also perfect for voice-overs where precise and consistent fade levels are required. Automatic operation can be achieved when used in conjuction with RDL´s® ST-ACR products.
| Inputs (2): | Balanced line level (or unbalanced) |
| Input Impedance: | 20 kΩ |
| Input Signal Range: | -20 dBu to +18 dBu |
| Output: | +4 dBu balanced (nominal) |
| Gain: | Adjustable using multiturn potentiometer |
| THD+N: | < 0.01% (20 Hz to 20 kHz, no compression) |
| Frequency Response: | 20 Hz to 20 kHz (± 1 dB) |
| Noise: | < -70 dB |
| Indicators (2): | 1 LED indicating proper music level 1 LED indicating proper voice level |
| AGC/Compressor: | 18 dB range; 6 dB compression at normal input level |
| Attack Time: | 25 ms |
| Release Time: | 2.5 seconds |
| Voice Trigger Level: | 24 dB below operating level |
| Music Fade Depth: | Adjustable 0 dB to −25 dB, or off |
| Music Recovery Delay: | Adjustable 2 seconds to 4 seconds |
| Ambient Operating Environment: | 0° C to 55° C |
| Power Requirement: | GROUND-REFERENCED, 24 Vdc @ 35 mA |
| Package Type: | Cardboard Box |
| Tariff code: | 8543.70.9860 |
| WEEE weight: | 0.145 lbs. |
| Shipping Weight: | 0.2 lbs. |
| Package Dimensions: | 2 x 2 x 4 in. |
STICK-ON Mounting Plate
STICK-ON Series 19" Mounting Rack - 10 modules
STICK-ON Series 19" Mounting Rack - 12 modules
STICK-ON Mounting Bracket
Rear rack rail mounting kit for any STICK-ON module
STICK-ON Series 19" Racking System - 12 modules
STICK-ON Series 19" Racking System - 10 modules
10.4" Rack Mount for 6 STICK-ON Series Products
Detachable Mounting Kit for RDL Modules
Mounting Kit - RU, ST and TX Series
STICK-ON Series Mounting Rack - 7 modules
STICK-ON® Series Detachable Terminal Block
| Documents | Format |
|---|---|
| Datasheet |
| CAD Files | Units | Format |
|---|---|---|
| Engineering Functional Block | American | DXF |
| Panel Diagram - End | American | DXF |
| Panel Diagram - Front | American | DXF |
| Panel Diagram - End | Metric | DXF |
| Panel Diagram - Front | Metric | DXF |
| High Res Images | Format |
|---|---|
| st-vp1.zip | TIF |
| Declaration of Conformity |
|---|
| Download |
Voice-Over/Paging with Multiple Paging Locations
Voice-Over/Paging with Multiple Paging Sources
Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:
| Company | Address | Phone | Link |
|---|
