RDL®

ST-CL2

Compressor/Limiter - Line Level

SKU: ST-CL2
  • Positive Audio Level Protection
  • Smooth Inaudible Gain Reduction
  • Tight Audio Peak Control
  • Very Low Noise Compressor
  • Multi Stage Incremental Gain Reduction
  • Fully Automatic Operation
  • Superb Performance with Minimal Setup
  • RDL® SupplyFlex™ Power Input Configuration
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The ST-CL2 is a high performance compressor/limiter designed to maintain a constant average output level and effective peak control over a wide range of input levels. The input and output are line level and each may be wired balanced or unbalanced. Trimmers provide adjustment for all usual professional and consumer audio input and output levels. Internal detectors feed three timing circuits. The threshold level and slope of each timing circuit are incremented to respond sequentially to signals of varying amplitude and energy levels. The ST-CL2 features a soft-knee compression threshold and compression ratio which automatically adjust to the program material. Two LED indicators cover the incremental ranges of compression, making setting of the input level quick and easy. Two ST-CL2s may be strapped together for stereo operation by connecting the coupling terminals between the two modules.

    Specifications

    Input:10 kΩ Balanced (may be connected unbalanced)
    Input Signal Range:-10 to +4 dBu, adjustable (for 6 dB gain reduction); +22 dBu maximum
    Output:150 Ω Balanced (may be connected unbalanced)
    Output Signal Range:OFF to +8 dBu, adjustable
    Frequency Response:10 Hz to 20 kHz (± 0.2 dB) over full compression range
    Noise below +4 dBu output:< -78 dB (unweighted; +4 dBu input/output)
    Total Harmonic Distortion:< 0.05% @ 1 kHz below compression threshold;
    < 0.1% @ 1 kHz with 3 dB gain reduction;
    60 dB (50 to 120 Hz)
    Attack Time:Averaging Compressor: 500 ms (+4 dBu input);
    Fast Compression: <10 ms (+20 dBu input);
    Peak Limiting: Instantaneous
    Release Time:Automatically adjusting up to 500 ms
    Compression Ratio:Automatically adjusting 1.5:1 to 10: 1
    Peak Limiter:INF:1
    Interconnection:Stereo COUPLE interconnection provided
    Indicators (2):Yellow LED for NORMAL Compression,
    Red LED for HEAVY Compression
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:24 Vdc @ 50 mA, SupplyFlex
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.2 lbs.
    WEEE weight:0.145 lbs.
    Tariff code:8543.70.9860

    Related Products

    Processing
    • FP-ALC1

      Automatic Level Control - Mono - Terminal block

    • FP-ALC2

      Automatic Level Control - Stereo - RCA Jacks

    • ST-GCA3

      Gain Control Amplifier - Line Level

    Related Products

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    Dimensions

    ST-CL2

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican4.01 KBDXF
    Panel Diagram - EndAmerican3.63 KBDXF
    Panel Diagram - FrontAmerican25.48 KBDXF
    Panel Diagram - EndMetric3.83 KBDXF
    Panel Diagram - FrontMetric25.58 KBDXF
    High Res ImagesFormat
    st-cl2.zipTIF
    st-cl2_graph.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close