RDL®

ST-CX2

Two Band Active Line-level Crossover

SKU: ST-CX2
  • Active Low-Frequency Woofer Equalization
  • Active Full-Range Equalization
  • Adjustable Equalization
  • Crossover with Loop-through Output
  • Low-Noise and Low-Distortion Crossover
  • RDL® SupplyFlex™ Power Input Configuration
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The ST-CX2 is a line-level two band crossover to drive audio power amplifiers. The input and outputs are balanced and may be connected unbalanced if necessary. The input accepts a +4 dBu line-level signal. The module operates at nominal unity gain.

    The FULL RANGE output is designed for use with full-range speaker systems which do not contain a woofer (below 100 Hz). The passband is 100 Hz to 30 kHz, with an equalization adjustment centered at 2 kHz. Through the application of a smile-curve providing up to 8 dB attenuation through midband audio frequencies, the performance of the whole system may be significantly enhanced.

    The WOOFER output is designed for use with woofers amplified independently of any full-range speakers. The passband is 40 Hz to 165 Hz when set flat, with an equalization BOOST adjustment centered at 50 Hz.

    For systems also incorporating subwoofers, the LOOP THRU output connects to an input of the RDL ST-CX2S Subwoofer Crossover. The ST-CX2 features RDL's SupplyFlex power input configuration for operation directly from ground-referenced, floating or bipolar 24 Vdc power.

    Specifications

    Input:50 kΩ balanced line-level (+4 dBu)
    Outputs (2):150 Ω balanced line-level (+4 dBu)
    Headroom:> 18 dB
    Gain:Unity (nominal, equalization set flat)
    Out-of-Band Rolloff:18 dB/octave

    FULL RANGE Output:
    Frequency Response:100 Hz to 30 kHz (± 0.5 dB)
    THD+N:< 0.075% (100 Hz to 30 kHz)
    Residual Noise:< -80 dB (referred to +4 dBu)

    WOOFER Output:
    Frequency Response:40 Hz to 165 Hz (± 0.5 dB)
    THD+N:< 0.025% (40 Hz to 165 Hz)
    Residual Noise:< -95 dB (referred to +4 dBu)
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED or FLOATING 24 Vdc @ 40 mA
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.195 lbs.
    WEEE weight:0.145 lbs.
    Tariff code:8543.70.9860

    Related Products

    Crossover Filters & Filters
    • ST-CX2S

      Subwoofer Crossover Filter

    • ST-HP3

      High Pass Filter - 300 Hz and 500 Hz

    Processing
    • ST-EQ3

      3 Band Equalizer - Line Level

    Related Products

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    Dimensions

    ST-CX2

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican4.08 KBDXF
    Panel Diagram - EndAmerican9.79 KBDXF
    Panel Diagram - FrontAmerican24.96 KBDXF
    Panel Diagram - EndMetric9.91 KBDXF
    Panel Diagram - FrontMetric25.22 KBDXF
    High Res ImagesFormat
    st-cx2.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close