RDL®

RU-SQ6A

Sequencing Controller - Power up, power down

SKU: RU-SQ6A
  • Control of Sequential Power-Up or Events
  • Adjustable Up/Down Time Interval
  • Open-collector Outputs
  • Relay Contact Closures
  • Up to Six Sequential Events
  • Sure-Lok™ Output Supervision
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The RU-SQ6A is the ideal choice in installations where sequential ON and sequential OFF functions are desired. Control and output connections are made on the rear panel through clearly identified detachable terminal blocks.

    Two types of outputs are provided for each of the 6 sequential steps. One type is an open collector capable of switching loads of 50mA. The other type is an SPST dry contact closure which may be used to control a variety of equipment. A single-turn front-panel TIMING INTERVAL control adjusts the time delay between channels from 1 to 10 seconds. Front-panel LEDs show when each output channel turns on and off. An internal microcontroller insures reliable, accurate timing.

    The up or down sequence is user-controlled by a front-panel pushbutton switch unless the module is set for remote operation. A rear-panel switch set by the installer selects either front-panel or remote control activation. LEDs indicate whether the front-panel SEQUENCE CONTROL switch or the remote terminals are active. Grounding the rear-panel ACTIVATE terminals or turning on the front-panel SEQUENCE CONTROL switch causes an UP REQUEST that starts the RU SQ6A outputs to turn on sequentially. The outputs remain active until the UP REQUEST is cancelled by turning off the front-panel or remote control switch, causing the outputs to turn off in reverse sequence. If the ACTIVATE terminal is permanently grounded with the module set for remote control, the RU-SQ6A outputs will turn on sequentially when power is applied to the module; all outputs will turn off simultaneously when power is removed from the RU-SQ6A. The UP REQUEST LED is illuminated when an UP sequence is requested. When the sequence is complete, the COMPLETE LED indicates the Sure-Lok™ supervisory circuit is actively latching the outputs active until the user de-activates the sequence.

    Specifications

    Control Input:External closure < 2.5 mA @ 24 Vdc
    Interval Between Outputs:1 to 10 seconds nominal, front-panel adjustable
    Indicators (10):Red LEDs indicating channel 'on' condition (6)
    Green LED indicating UP REQUEST
    Green LED indicating sequence COMPLETE
    Red / Green LEDs indicating Remote or Front-Panel Activation
    24 Vdc Output:1.1 A maximum, 100 mA less than power supply current
    Open Collector (6):200 mA surge; 50 mA continuous; 200 mA maximum
    Relay Outputs (6):SPST (closed when active)
     Maximum Switching Power:60 W (220 Vdc, 125 Vac, 2A)
      Maximum Switching Voltage:220 Vdc, 250 Vac
      Maximum Switching Current:2 A
      Maximum Carrying Current:3 A
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:24 Vdc @ 100 mA (plus total load current connected to 24 Vdc output)
    Dimensions:Height: 1.7 in. 4.3 cm; Length: 5.8 in. 15.0 cm; Depth: 3.45 in. 8.8 cm
    Package Type:Cardboard Box
    Package Dimensions:4.375 x 7 x 2.25 in.
    Shipping Weight:1.11 lbs.
    WEEE weight:0.87 lbs.
    Tariff code:8543.70.9860

    Related Products

    Switching & Control
    • ST-RX2

      Audio Routing Switcher - 1x2

    • ST-SSR1

      Line-Level Audio Switch - 2x1

    Switching & Control
    • TX-MVX

      Manual Rmt Controlled Video Switch - 2x1 - BNC

    Related Products

    Rack-Up® Mounting Accessories
    • UC-2R

      Double Wide RACK-UP Enclosure

    • WDG1R

      Table Top "Wedge" Chassis

    • UC-1R

      RACK-UP Enclosure

    • RU-RA3R

      Rack adapter for RACK-UP series

    • RU-HRA1

      10.4" Rack Mount for 1 RACK-UP Series Product

    • RU-SMA1

      RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface

    • RU-BR1

      Mounting Bracket for RACK-UP Series

    General Wiring Accessories
    • RC-1UR

      19" Universal Rack Chassis

    DIN Rail Mounting Accessories

    Dimensions

    RU-SQ6A

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican5.45 KBDXF
    Panel Diagram - FrontAmerican5.75 KBDXF
    Panel Diagram - RearAmerican15.74 KBDXF
    Panel Diagram - FrontMetric5.96 KBDXF
    Panel Diagram - RearMetric16.08 KBDXF
    High Res ImagesFormat
    ru-sq6a.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    Related Products

    • AMS-PB1

      Momentary SPDT Pushbutton - fits all AMS mounts

    • AMS-SW2

      Rocker Switch DPDT - fits all AMS mounts

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close