RDL®

TX-TPS1A

Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

SKU: TX-TPS1A
  • Single -10 dBV Unbalanced or +4 dBu Balanced Input
  • Phono Jack and Detachable Terminal Block Inputs
  • Switch Selects which RJ45 Pair (A, B or C) is Fed
  • Signal and Power Pair Pass-Through from LOOP IN Jack
  • Powered Locally or Remotely through RJ45 Jack
  • Fused Local Power Feeds all Modules Connected to RJ45s
  • Local Power Input on Terminal Block or dc Power Jack
  • Blue LED Indicates Module is Powered
  • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
  • Studio-Quality Precision Active Balanced Circuitry
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The TX-TPS1A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One line-level source may be connected to the module using either the -10 dBV unbalanced RCA phono jack or the +4 dBu balanced detachable terminal block. A studio-quality buffer amplifier feeds the RJ45 OUTPUT at the correct operating level.

    The TX-TPS1A is a single-pair sender, feeding the input signal to the cable pair set on the front-panel switch during installation. This module drives only one cable pair, therefore a LOOP IN RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to the LOOP IN jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The TX-TPS1A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C.

    The TX-TPS1A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the LOOP IN and OUTPUT RJ45 jacks. The TX-TPS1A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.

    Specifications

    Inputs (2):20 kΩ balanced; 10 kΩ unbalanced
    Input Connection:Terminal Block (Bal.); Phono Jack (Unbal.)
    Input Level:+4 dBu Bal.; -10 dBV Unbal.; +22 dBu Max
    Format-A Signal Pair Used:Switch-selectable A, B, or C
    Format-A Input:RJ45 LOOP IN
    Output:RDL TP Format-A
    Output Connection:RJ45
    Frequency Response:10 Hz to 50 kHz (± 0.1 dB)
    THD+N:< 0.005%
    Noise below +4 dBu: 18 dB
    CMRR:> 60 dB (50 Hz to 150 Hz)
    Indicator:Power In
    Power Connections (3):Power Jack; Detachable Terminal Block; RJ45
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:24 Vdc @ 35 mA plus connected loads
    Dimensions:3.0" (7.6 cm) W; 1.6" (4.08 cm) H; 2.09" (5.3 cm) D
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.46 lbs.
    WEEE weight:0.4 lbs.
    Tariff code:8543.70.9860

    Related Products

    Power Inserters / Breakout
    • FP-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    • RU-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    Format-A® Mixers
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Mixing
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Format-A® Distributors
    • RU-TPDA

      Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

    • RU-TPS4A

      Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

    Format-A® Receivers
    • Format-A twisted pair receiver to balanced line output

      TX-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

    • TX-TPR3A

      Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

    • TX-TPR6A

      Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

    Format-A® Senders
    • TX-TPS6A

      Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

    Related Products

    TX™ Mounting Accessories
    • TX-HRA3

      10.4" Rack Mount for 3 TX Series Products

    • TX-RRB1

      Rear rack rail mounting kit for any TX series module

    • TX-RA5

      TX Series 19" Racking System - 5 modules 1RU

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • DRA-35T

      TX Series DIN Rail Adapter

    DIN Rail Mounting Accessories
    General Mounting Accessories
    • MB-2

      Mounting Kit - RU and TX Series

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • MB-3

      Kit to Mount ST, TX Series Modules on FP Panel

    Accessories
    • RC-HPS1

      10.4" Rack Mount for Desktop Power Supply and TX Module

    Pole Mounting Accessories

    Dimensions

    TX-TPS1A

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican4.06 KBDXF
    Panel Diagram - FrontAmerican8.38 KBDXF
    Panel Diagram - FrontMetric8.66 KBDXF
    High Res ImagesFormat
    tx-tps1a.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close