RDL®

STA-2A

Dual High Gain Line Amplifiers

SKU: STA-2A
  • Up to 24 dB Gain in Audio Lines
  • Conversion between Unbalanced and Balanced
  • Conversion between High and Low Impedance
  • Low-Impedance, High-Current Line Drivers
  • Dual-Channel Line-Level Preamplifiers
  • High Gain, High Output, High Performance
  • RDL® SupplyFlex™ Power Input Configuration
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The STA-2A is a dual-channel, line-level audio preamplifier. Each channel is identical. The audio inputs are bridged at 20 kΩ and accept either an unbalanced or a balanced audio signal. Gain is adjustable from unity to +24 dB using a 25-turn precision audio taper trimming potentiometer. The output line driver circuits are designed to drive long balanced audio lines into 600 Ω loads.

    The STA-2A features wideband circuitry for excellent phase response, low noise, low distortion and exceptional audio clarity. RDL's SupplyFlex power input configuration is included in the STA-2A. The power supply input may be fed from a floating (not ground-referenced) 24 Vdc power source, from a bipolar power supply (+/- 12 Vdc or +/-15 Vdc) or from a ground-referenced 24 Vdc power supply.

    Many audio products provide optimum performance when feeding into a bridging input, but may not provide the output needed to directly drive low-impedance lines terminated with 600 Ω transformers. The STA-2A is specifically designed for such installations, and is also ideal in installations requiring high gain in line-level audio transmission.

    Specifications

    Amps per STA-2A:2 identical circuits (stereo or dual mono operation)
    Inputs (2):20 kΩ balanced or unbalanced
    Input Signal (for +4 dBu out):-20 dBu (-18 dBV) to +18 dBu
    Maximum Input Level:+24 dBu
    Outputs (2):150 Ω balanced or 75 Ω unbalanced

    Output Signal:
      Balanced:+4 dBu nominal
      Unbalanced:6 dB below balanced line level
    Maximum Output Level:+25 dBu
    Frequency Response:10 Hz to 100 kHz (± 0.05 dB)
    THD+N:< 0.004% (unity gain)
    IMD:< 0.005% (unity gain)
    Noise below +4 dBu:< -90 dB (unity gain)
    Crosstalk: 20 dB (above +4 dBu)
    Gain:Unity +24 / -14 dB (adjustable)
    CMRR:> 60 dB (50 Hz to 120 Hz)
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED or FLOATING, 24 Vdc @ 50 mA
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.2 lbs.
    WEEE weight:0.145 lbs.
    Tariff code:8543.70.9860

    Related Products

    Line Amplifiers / Interface
    • FP-BUC2

      Balanced to Unbalanced Converter - 2 channel

    • FP-UBC2

      Unbalanced to Balanced Converter - 2 Channel

    • RU-AFC2

      Stereo Audio Format Converter

    • ST-UBA2

      Unbalanced to Balanced Amplifier - 2 channel

    • STA-1

      Dual Balanced/Unbalanced Line Amplifier -12 to 20 dB Gain

    • STA-1M

      Audio Line Amplifier - Mono: -14 to 14 dB Gain

    Microphone Products
    • RU-MLA2

      Dual Microphone / Line Preamplifier

    Related Products

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    Dimensions

    STA-2A

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.97 KBDXF
    Panel Diagram - EndAmerican5.47 KBDXF
    Panel Diagram - FrontAmerican60.99 KBDXF
    Panel Diagram - EndMetric5.49 KBDXF
    Panel Diagram - FrontMetric111.67 KBDXF
    High Res ImagesFormat
    sta-2a.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close