RDL®

RU-MX5ML

5 Channel Mic/Line Audio Mixer with Phantom Power

SKU: RU-MX5ML
  • Mic or Line Level Audio Mixer
  • Five Channel Audio Mixer with Expansion Capability
  • Inputs and Outputs on Detachable Terminal Blocks
  • Switchable 24 V Phantom for Each Mic Input
  • Balanced Mic and Line Outputs
  • Expansion Bussing Capability
  • Output Level dual-LED VU Metering
  • Studio-Quality, Low-Noise Performance
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The RU-MX5ML is the ideal choice in many applications where a combination of balanced mic and/or balanced or unbalanced line-level signals needs to be mixed with the ability for additional expansion. All connections are made using detachable terminal blocks on the rear panel. Four of the RU-MX5ML inputs can accept either mic or line inputs. The fifth input is for line level sources.


    24 V phantom is individually switch selectable for each mic input. The output from one RU-MX5ML may connect to the MIX input of another RU-MX5ML to expand mixing capabilities. The output section provides both a balanced line (+4 dBu) and balanced microphone level (-45 dBu) output. Both outputs may be used at the same time. Audio levels are adjustable on the front panel. The output is equipped with a front-panel dual-LED VU meter that follows standard VU ballistics.

    Specifications

    Inputs (6):4 selectable mic or line level; 1 line level; 1 direct MIX; detachable terminal block
    Input Impedance:Mic: >1.2 kΩ balanced; Line: >10 kΩ balanced
    Maximum Input Level:Mic: -20 dBu; Line: +24 dBu
    Phantom:Switch-selectable 24 V (IEC 61938: 2013)
    Gain:Mic: Off to 65 dB; Line: Off to 15 dB
    Outputs (2):Mic: -45 dBu balanced; Line: +4 dBu balanced; detachable terminal block
    Output Impedance:150 Ω balanced
    Frequency Response:Mic: 80 Hz to 40 kHz (±1 dB, < -6 dB at 20 Hz with integral high-pass filter); Line: 10 Hz to 35 kHz (± 0.5 dB)
    THD+N:Mic: < 0.03%; Line: <0.003%
    Headroom:20 dB (above +4 dBu output)
    Noise:< -70 dB below +4 dBu output (20 Hz to 20 kHz, all mic channels at 50 dB gain; or one mic channel active at 60 dB gain); -65 dB (10 Hz to 10 kHz); Line: > -45 dB
    Metering:Dual-LED VU Meter (calibrated to +4 dBu)
    Dimensions:Height: 1.7 in. 4.3 cm; Width: 5.8 in. 15.0 cm; Depth: 4.8 in. 12.2 cm
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 75 mA (120 mA max. including phantom); detachable terminal block
    Package Type:Cardboard Box
    Package Dimensions:6 x 6 x 2.625 in.
    Shipping Weight:1.385 lbs.
    WEEE weight:1.13 lbs.
    Tariff code:8543.70.9860

    Related Products

    Mixing
    • EZ-MX4L

      Stereo Line-Level Audio Mixer - 4X1

    • FP-MX3R

      Remote Controlled Line-Level Mixer

    • FP-MX4

      4 Channel Audio Mixer - Microphone or line input and output

    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    • RU-MX4

      Professional 4 Channel Microphone/Line Mixer with Phantom Power - Microphone and line output

    • RU-MX4L

      Professional 4 Channel Line Level Mixer - Microphone and line Output

    • RU-MX4LT

      Professional 4 Channel Line Level Mixer with Transformer - Microphone and line output

    • 4 Channel Mixer

      RU-MX4T

      Professional 4 Channel Microphone/Line Mixer with Phantom Power & Transformer - Microphone and line output

    • ST-MX2

      2 Channel Audio Mixer - Microphone or line input and output

    • ST-MX3

      3 Channel Audio Mixer - Line input and output

    • ST-UMX3

      3x1 Universal Audio Mixer - 3 microphone or line inputs x 1 microphone or line output

    • TX-MX2R

      Audio Mixer / Distribution Amplifier

    Format-A® Mixers
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Related Products

    Rack-Up® Mounting Accessories
    • UC-2R

      Double Wide RACK-UP Enclosure

    • WDG1R

      Table Top "Wedge" Chassis

    • UC-1R

      RACK-UP Enclosure

    • RU-RA3R

      Rack adapter for RACK-UP series

    • RU-HRA1

      10.4" Rack Mount for 1 RACK-UP Series Product

    • RU-SMA1

      RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface

    • RU-BR1

      Mounting Bracket for RACK-UP Series

    General Wiring Accessories
    • RC-1UR

      19" Universal Rack Chassis

    DIN Rail Mounting Accessories

    Dimensions

    RU-MX5ML

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican9.34 KBDXF
    Panel Diagram - FrontAmerican17.34 KBDXF
    Panel Diagram - RearAmerican23.53 KBDXF
    Panel Diagram - FrontMetric17.31 KBDXF
    Panel Diagram - RearMetric23.52 KBDXF
    High Res ImagesFormat
    ru-mx5ml.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close