RDL®

STM-2

Adjustable Gain Microphone Preamplifier - 35 to 65 dB gain

SKU: STM-2
  • Low-Noise Mic Preamp
  • Adjustable Output Level
  • High or Low Impedance Mic Inputs
  • Mic Input to 2 Line Outputs
  • Two Balanced or Unbalanced Outputs
  • Phantom Capability
  • RF-Filtered Inputs
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The STM-2 is a quality low-noise microphone preamplifier designed for use in commercial sound, broadcast, and recording. The STM-2 is very flexible, with gain adjustment from 35 to 65 dB, two balanced or unbalanced outputs, and available phantom supply input. Its ultra-low distortion and lownoise performance make it the best choice, even when larger preamps could be used. The STM 2 supply input is single ended and operates from 24 Vdc. Operation from 12 Vdc is possible with a 6 dB reduction in headroom. Each output drives high or low impedance loads.

    Specifications

    Input:500 Ω balanced; 5 kΩ unbalanced
    Phantom:24 Vdc; IEC 61938: 2013, Filtered
    Outputs (2):+4 dBu 150 Ω balanced; -10 dBv unbalanced
    Frequency Response:50 Hz to 30 kHz (± 1.5 dB)
    Gain:Adjustable 35 to 65 dB
    THD+N:50 dB (50 Hz to 20 kHz)
    Residual Noise:< -70 dB (below +4 dBu 150 Ω source @ 50 dB gain)
    Headroom:> 20 dB (24 Vdc supply);
    > 14 dB (12 Vdc supply)
    Phantom Power Input:24 to 33 Vdc @ 10 mA maximum
    Power Requirement:GROUND-REFERENCED, 24 to 33 Vdc @ 25 mA
    Ambient Operating Environment:0° C to 55° C
    Dimensions:Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), Depth: 1.6 in. (3.9 cm)
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.195 lbs.
    WEEE weight:0.145 lbs.
    Tariff code:8543.70.9860

    Related Products

    Microphone Products
    • EZ-MPA1

      Microphone Preamplifier - Stereo Output with Compressors

    • EZ-MPA2

      Dual Microphone Preamplifier - Stereo Output with Compressors

    • FP-MP1

      Studio Quality Microphone Preamplifier with Phantom - Terminal block & XLR

    • HR-MP2

      Dual Microphone Preamplifier

    • HR-MP2A

      Dual Microphone Preamplifier

    • RU-MLA2

      Dual Microphone / Line Preamplifier

    • A compact high quality microphone preamplifier

      STM-1

      Microphone Preamplifier - 50 dB Gain

    • STM-3

      High Gain Microphone Preamplifier - 45 to 75 dB gain

    Power Amplifiers
    • ST-MA2

      2 W Mono Audio Amplifier with Muting - 8 Ω

    Distribution
    • STM-DA3

      Microphone Level Distribution Amplifier - 1x3

    Related Products

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    Dimensions

    STM-2

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.94 KBDXF
    Panel Diagram - EndAmerican3.16 KBDXF
    Panel Diagram - FrontAmerican60.58 KBDXF
    Panel Diagram - EndMetric3.03 KBDXF
    Panel Diagram - FrontMetric62.02 KBDXF
    High Res ImagesFormat
    stm-2.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close