FP-MX4 4 Channel Audio Mixer - Microphone or line input and output

FP-MX4 4 Channel Audio Mixer - Microphone or line input and output

Radio Design Labs - 4 Channel Audio Mixer - Microphone or line input and output

Four Channel Audio Mixer
Balanced Microphone and Line Inputs
Balanced Microphone and Line Outputs
Switch‑Selectable 24 V Mic Phantom
Three Switch‑Selectable Mic Gain Ranges
Studio‑Quality, Low‑Noise Performance
Convenience of RDL® FLAT‑PAKs™

The FP‑MX4 is a single‑channel audio mixing module featuring four identical inputs. Each input accepts either a mic or line level source. The output section provides four mixing potentiometers corresponding to the four inputs. The output section provides both a balanced line (+4 dBu) and balanced microphone level (‑45 dBu) output. Both outputs may be used at the same time. The four mixing potentiometers are intended to be set at installation or to be adjusted occasionally. Levels may be adjusted at the mixer using the RDL dual‑LED VU meter which displays the mixer output level.

Typical Performance:

Microphone Inputs (4):		2 kΩ balanced, switchable 24 V phantom (IEC 1938: 1996‑12)
Microphone Input Level:		Switch selectable ranges: ‑30 to ‑40 dBu, ‑40 to ‑50 dBu, < ‑50 dBu
Line Inputs (4):		+4 dBu, 10 kΩ balanced (or unbalanced)
Gain:
Mic: Line:		Off to 65 dB gain (adjustable each input) Off to 6 dB gain (adjustable each input)
Frequency Response:
Mic: Line:		10 Hz to 30 kHz (+/‑ 0.25 dB) 10 Hz to 45 kHz (+/‑ 0.25 dB)
THD+N:
Mic: Line:		< 0.012% < 0.004%
Residual Noise (below +4dBu output):		Note, (A) = A‑Weighted
Unity Gain:		4 Line level sources < ‑84 dB (wideband)
40dB Gain:		Mic: ‑90 dB; All 4 mic level sources: < ‑82 dB (wideband); < ‑84 dB (A)
50dB Gain:		Mic: ‑86 dB; All 4 mic level sources: < ‑72 dB (wideband); < ‑76 dB (A)
60dB Gain:		Mic: ‑80 dB; All 4 mic level sources: < ‑65 dB (wideband); < ‑67 dB (A)
Outputs (2):
Line: Mic:		+4 dBu 150 Ω balanced ‑45 dBu 150 Ω balanced
Indicators (2):		Dual‑LED VU meter (line‑level output)
Power Requirement:		GROUND‑REFERENCED, 24 Vdc @ 160 mA
Overall Dimensions:
Height:		1.42 in. 3.61 cm
Width:		3.25 in. 1.42 in.
Length:		8.14 in. 1.42 in.
Ambient Operating Environment:		0° C to 50° C

Data/Installation

Mounting Accessories:

FP-RRA Rack Adapter FLAT-PAK Series - 19" Fixed	FP-RRAH Rack Adapter FLAT-PAK Series - 19" Hinged	DRA-35F FLAT-PAK DIN Rail Adapter
PM-1T Pole Mount Tray	PM-1V Pole Mount Adapter for FLAT-PAK Modules - Vertical

General Accessories:

AMS
Accessory Mounting System

Related Products:

RU-MX4 Professional 4 Channel Microphone/Line Mixer with Phantom Power - Microphone and line output	ST-MX2 2 Channel Audio Mixer - Microphone or line input and output	ST-MX3 3 Channel Audio Mixer - Line input and output	ST-UMX3 3x1 Universal Audio Mixer - 3 microphone or line inputs x 1 microphone or line output
RU-MX5ML 5 Channel Mic/Line Audio Mixer with Phantom Power	RU-MX5 5 Channel Audio Mixer with Phantom Power - Microphone or line input, microphone or line output

Copyright © 2010 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: June 29 2010

...