Each STD module is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. This permits combining stereo signals into mono inputs, splitting mono signals to multiple inputs, and even combining microphones with output shorting switches into a single amplifier input. The STD modules are available in 150 Ω, 600 Ω and 10 kΩ models. All inputs and outputs are balanced.
| WEEE weight: | 0.135 lbs. |
| Shipping Weight: | 0.185 lbs. |
| Circuit Type: | Passive |
| Circuit Configuration: | Balanced |
| Input/Output Impedance: | 10 kΩ |
| Number of Inputs / Outputs: | 4 total; usable in any combination; split 1 in to 3 out; 2 in to 2 out; 3 in to 1 out |
| Insertion Loss: | 3 dB |
| Isolation Between Channels: | 3 dB (use RDL mixers or distribution amps for isolation) |
| Tariff code: | 8543.70.9860 |
| Package Dimensions: | 2 x 2 x 4 in. |
| Maximum Signal Input: | +22 dBu |
| Power Requirement: | Passive (not required) |
| Package Type: | Cardboard Box |
Detachable Mounting Kit for RDL Modules
Mounting Kit - RU, ST and TX Series
STICK-ON Series Mounting Rack - 7 modules
STICK-ON Mounting Plate
STICK-ON Series 19" Mounting Rack - 10 modules
STICK-ON Series 19" Mounting Rack - 12 modules
STICK-ON Mounting Bracket
Rear rack rail mounting kit for any STICK-ON module
STICK-ON Series 19" Racking System - 12 modules
STICK-ON Series 19" Racking System - 10 modules
10.4" Rack Mount for 6 STICK-ON Series Products
STICK-ON® Series Detachable Terminal Block
| Documents | Format |
|---|---|
| Datasheet |
| CAD Files | Units | Format |
|---|---|---|
| Engineering Functional Block | American | DXF |
| Panel Diagram - Front | American | DXF |
| Panel Diagram - End | American | DXF |
| Panel Diagram - End | Metric | DXF |
| Panel Diagram - Front | Metric | DXF |
| High Res Images | Format |
|---|---|
| std-600.zip | TIF |
| Declaration of Conformity |
|---|
| Download |
10 KΩ Combiner Provides a Cost-Effective High-Impedance Mixing Solution
Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:
| Company | Address | Phone | Link |
|---|
