RDL®

SF-NP40D

Network to 40 W Stereo Power Amplifier

SKU: SF-NP40D
  • Converts Two Dante Network Audio Signals to two 20 W Outputs into 8 Ohms
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • 0 dBFS Input for 20 W per channel into 8 Ohms or 15 W per channel into 4 Ohms
  • Special Software Not Required for Module Setup
  • LED Indicator for Network Sync
  • High-Efficiency Class D Operation
  • Thermal and Short-Circuit Protection
  • Included Power Supply 100 to 240 VAC, 50/60 Hz, 1.5A Input; 24 Vdc Output
  • SF-NP40D includes North American Cord; SF-NP40DE excludes Power Cord
Recommended Power Supply ( Included )
PS-24V3A (USA)PS-24V3 (International)

Description

The SF-NP40D is an audio power amplifier that converts two Dante network audio channels to two 4 Ohm or 8 Ohms amplified outputs. Each output provides 20 watts into 8 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

A front-panel blue LED illuminates when the SF-NP40D is powered from its included external 24 Vdc power supply. The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stages produce minimal heat for all levels of expected voice or music modulation. Valid synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The SF-NP40D is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX® product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX® products adds enormous flexibility in the design and installation of professional A/V systems.

Specifications

Network Connector:RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol:Dante
Transmission Rate:100 Mbps
Sample Rates Supported:44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
Bit Depth Supported:24 bits
Reference Level:0 dBFS = 20 W into 8 Ω
Outputs (2):Balanced, detachable terminal block
Output Level (maximum):0 dBFS = 20 W into 8 Ω per channel; 15 W into 4 Ω
Load impedance:4 Ω or 8 Ω, switch-selectable
Frequency Response:20 Hz to 20 kHz (+ 0/-6 dB)
THD+N:< 0.1% (20 Hz to 20 kHz,+4 dBu/-20 dBFS); 0.015% at 1 kHz (typ)
Noise:< -80 dB (below 20 W / 8 Ω)
Crosstalk:< -75 dB (1 kHz, output to output)
Headroom above -20 dBFS:20 dB
Indicators (3):Ethernet Link and Speed (2, rear panel); Sync (front panel)
Ambient Operating Environment:0° C to 40° C
Power Supply (included):100 to 240 Vac, 50-60 Hz, 1.3 A, IEC C14; Output to module: 24 Vdc, 2 A, Ground-referenced
Specification Conditions:Gain/Level: ± 1 dB
Dimensions:3.51" (8.92 cm) W; 1.68" (4.27 cm) H; 5.77" (14.66 cm) D
Package Type:Cardboard Box
Package Dimensions:6 x 6 x 2.625 in.
Shipping Weight:2 lbs.
WEEE weight:1.77 lbs.
Tariff code:8543.70.9100

Related Products

Dante™
  • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

    DD-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DD-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

    DD-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • White wall-mounted 4x4 Dante interface

    DD-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DD-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • DDB-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DDB-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • DDS-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DDS-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • FP-NML2

    Network to Mic/Line Interface

  • FP-NML2P

    Network to Mic/Line Interface

  • FP-NML2V

    Network to Mic/Line Interface with VCA

  • FP-NML2VP

    Network to Mic/Line Interface with VCA

  • RU-BNF

    Format-A Bi-Directional Network Interface

  • RU-BNFP

    Format-A Bi-Directional Network Interface

  • RU-FN

    Format-A to Network Interface

  • RU-FNP

    Format-A to Network Interface

  • RU-LB2

    Line-Level Bi-Directional Network Interface

  • RU-LB2P

    Line-Level Bi-Directional Network Interface

  • RU-LB4

    Line-Level Bi-Directional Network Interface

  • RU-LB4P

    Line-Level Bi-Directional Network Interface

  • RU-MLB2

    Mic/Line Bi-Directional Network Interface

  • RU-MLB2P

    Mic/Line Bi-Directional Network Interface

  • RU-MLB4

    Mic/Line Bi-Directional Network Interface

  • Mic/Line Bi-Directional Dante Interface

    RU-MLB4P

    Mic/Line Bi-Directional Network Interface

  • RU-NFD

    Network to Format-A Interface/Distributor

  • RU-NFDP

    Network to Format-A Interface/Distributor

  • RU-NL2

    Network to Line Level Interface

  • RU-NL2P

    Network to Line Level Interface

  • RU-NL4

    Network to Line Level Interface

  • RU-NL4P

    Network to Line Level Interface

  • Bidirectional Unbalanced Stereo Dante Interface

    SF-BNC2

    Bidirectional Unbalanced Stereo Audio Network Interface

  • SF-DN4

    Digital Audio to Network Interface

  • SF-ND2

    Network to Digital Audio Interface

  • SF-NH1

    Network to Stereo Headphone Amplifier

  • SF-NL2

    Network to Audio Interface

  • SF-UN1

    USB to Dante Network Interface

  • SF-XMN4

    Microphone to Network Interface

Related Products

SysFlex™ Mounting Accessories
  • SF-MSM1

    SysFlex® Microphone Stand Mounting Adapter

  • SF-UCB2

    Under Counter Bracket Pair for SysFlex® Products

  • SF-RA1

    SysFlex® Rack Adapter

Dimensions

SF-NP40D

Downloads

DocumentsFormat
DatasheetPDF
CAD FilesUnitsSizeFormat
Engineering Functional BlockAmerican KBDXF
Panel Diagram - RearAmerican KBDXF
Panel Diagram - RearAmerican KBDXF
Panel Diagram - RearMetric KBDXF
Panel Diagram - RearMetric KBDXF
High Res ImagesFormat
sf-np40d.zipTIF
Declaration of Conformity
Download

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink
Shopping cart close