0 RU-UDA4 Stereo Audio Distribution Amplifier - 2x4 - RCA jacks
RU-UDA4 Stereo Audio Distribution Amplifier - 2x4 - RCA jacks | | - Stereo Unbalanced Audio Distribution
- Unity Gain on Both Channels
- Four Outputs per Channel
- Stand Alone or Rack‑Mountable
- Exceptional Audio Performance
- 1/3 Rack, High‑Density Rack Mounting
| The RU‑UDA4 is the optimum choice where connectorized, unbalanced line‑level distribution is needed. This unit features two separate, isolated channels. The RU‑UDA4 may be used in stereo applications, or as two individual monaural distribution amplifiers. The input signals are buffered through output line drivers, providing four separate line‑level unbalanced outputs for each of the two inputs. The RU‑UDA4 performance is tailored around industry standard ‑10 dBV input/output levels. Excellent frequency response, phase response, low‑distortion and low‑noise performance combine to produce the audio clarity and precision for which RDL® products are well known. | 
| Typical Performance: | Input Connectors (2): | | Phono | Input Impedance: | | 10 kΩ unbalanced | Output Connectors (8): | | 4 per channel, phono | Output Impedance: | | 100 Ω unbalanced | Channels: | | 2 (left & right; may be used independently as 2 separate mono amplifiers) | Frequency Response: | | 5 Hz to 50 kHz (+/‑ 0.5 dB) | THD+N: | | < 0.020% | Noise: | | < ‑90 dB (below ‑10 dBV) | Crosstalk: | | < ‑90 dB (1 kHz);
< ‑80 dB (10 kHz)
< ‑75 dB (20 kHz) | Headroom: | | > 28 dB | Power Requirement: | | GROUND‑REFERENCED, 24 to 33 Vdc @ 25 mA | Ambient Operating Environment: | | 0° C to 55° C |
|
|
 MB-1
Mounting Kit - RU, ST and TX Series
|  MB-2
Mounting Kit - RU and TX Series
|  RC-1U
19" Universal Rack Chassis - RU, ST and TX Series
|  RU-RA3A
19" Rack Mount for 3 RACK-UP Series Products
|  RU-RA3
19" Rack Mount for 3 RACK-UP Series Products
|  RU-RA3HD
19" Rack Mount for 3 RACK-UP or MAX RACK-UP Products
|  UC-1
Single Wide Enclosure - RACK-UP Mounts
|  UC-2
Double Wide Enclosure - RACK-UP Mounts
|  WDG1
Table Top Chassis for RU, ST and TX Series
|  RU-BR1
Mounting Bracket for RACK-UP Series
|  RU-FP1
RACK-UP Filler Panel (and Reverse Mounting Kit)
|  RU-WMP1
Wall Mount Plate for RACK-UP Series Products
|
 RU-WHA4
Wiring Harness Adapter - RACK-UP Series
| | |
ST-DA3
Line Level Distribution Amplifier - 1x3 | RU-DA4D
Audio Distribution Amplifier - Balanced - 2x4 |
|
|
|
Copyright © 2009 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: November 20 2008
|
