0 ST-CX2S Subwoofer Crossover Filter
ST-CX2S Subwoofer Crossover Filter | | - Active Subwoofer Equalization
- Subwoofer Signal from Stereo Source
- Adjustable Low‑Frequency Boost
- Low‑Noise and Low‑Distortion Crossover
- Active Crossover Component
- RDL® SupplyFlex™ Power Input Configuration
| The ST‑CX2S is a subwoofer signal equalizer in the STICK‑ON series of products from RDL. The ST‑CX2S offers flexibility in equalization adjustment, with the exceptional performance of RDL. The ST‑CX2S features two separate, isolated balanced bridging inputs which may each be wired balanced or unbalanced. The output driver is 150 Ω balanced which can drive low or high impedance balanced or unbalanced lines. The module operates at unity gain at 63 Hz (balanced input to balanced output). A BOOST control permits adjustment of the output at 32 Hz from flat to +5.5 dB. The ST‑CX2S features RDL’s SupplyFlex power input configuration for operation directly from ground‑referenced, floating or bipolar 24 Vdc power. | 
| Typical Performance: | Inputs (2): | | 50 kΩ balanced line‑level (+4 dBu) | Output: | | 150 Ω balanced line‑level (+4 dBu) | Output Bandwidth: | | 22 Hz to 80 Hz, (adjustable BOOST) | High Frequency Attenuation: | | > 45 dB (at 400 Hz) | Gain: | | Unity at 63 Hz; adjustable flat to +5.5 dB at 32 Hz | Headroom: | | 18 dB minimum at 30 Hz (maximum boost), 22 dB typical | THD+N: | | < 0.05% | Input CMRR: | | > 60 dB (30 Hz or above) | Residual Noise: | | < 90 dB (referred to +4 dBu); 95 dB typical | Power Requirement: | | GROUND‑REFERENCED or FLOATING, 24 to 33 Vdc @ 30 mA |
|
|
 MB-1
Mounting Kit - RU, ST and TX Series
|  MB-3
Kit to Mount ST, TX Series Modules on FP Panel
|  MSR-1
Snap Rail Adapter - STICK-ON Series
|  RC-1U
19" Universal Rack Chassis - RU, ST and TX Series
|  RU-RA3A
19" Rack Mount for 3 RACK-UP Series Products
|  SMK-12
STICK-ON Mounting Plate
|  SR-10
STICK-ON Series 19" Mounting Rack - 10 modules
|  SR-12A
STICK-ON Series 19" Mounting Rack - 12 modules
|  SR-4
STICK-ON Series Mounting Rack - 7 modules
|  STR-19A
STICK-ON Series 19" Racking System - 12 modules
|  STR-19B
STICK-ON Series 19" Racking System - 10 modules
|  UC-1
Single Wide Enclosure - RACK-UP Mounts
|  UC-2
Double Wide Enclosure - RACK-UP Mounts
|  WDG1
Table Top Chassis for RU, ST and TX Series
|  FP-PBR4
STICK-ON Mounting Bracket
|  PM-1T
Pole Mount Tray
|  DRA-35S
STICK-ON DIN Rail Adapter - 1 module
|  DRA-35S6
STICK-ON DIN Rail Adapter - 6 modules
|
 DTB
STICK-ON® Series Detachable Terminal Block
|  AMS
Accessory Mounting System
| |
ST-EQ3
3 Band Equalizer - Line Level | ST-HP3
High Pass Filter - 300 Hz and 500 Hz |
|
|
|
Copyright © 2008 Radio Design Labs, Inc. RDL, Radio Design Labs, the RDL logo, STICK-ON, RACK-UP and the Rack-Up logo are registered trademarks of Radio Design Labs, Inc. Flat-Pak, RCX, SourceFlex, SupplyFlex, Sure-Lok, TX, ULTRASTYLE, and Specialists in Practical Precision Engineering are trademarks of Radio Design Labs, Inc. All other trademarks are the property of their respective owners. Typical Performance reflects product at publication time exclusive of EMC data, if any, supplied with product. Date last modified: November 20 2008
|
