Use the SF-ND2 to convert 2 channels of Dante to stereo AES/EBU or S/PDIF inputs of studio monitors or audio recorders without leaving the digital domain.
The SF-ND2 is powered via PoE and offers selectable Dante Sample Rates of 44.1 kHz, 48 kHz, 88.2 kHz or 96 kHz. The output is switch selectable to provide AES/EBU (male XLR), or S/PDIF (coaxial or optical).
The SF-ND2 is constructed in a steel enclosure and may be used free standing. Accessories are available for mounting the interface in equipment racks, under counters or on microphone stands
RDL manufacturers dozens of audio amplifiers for Dante network or conventional audio systems, including a selection of plenum-rated network audio amplifiers. Amplifier models and features: SF-NP35E PoE++ Network to 35 W Mono Audio Amplifier – 70 V or 100 V SF-NP16E PoE+ Network to 16 W Mono Audio Amplifier – 70 V or 100 V…
The RDL SF-DN4 is used to convert up to two stereo digital audio sources to four Dante channels without leaving the digital domain. The SF-DN4 is PoE powered and offers selectable Dante Sample Rates of 44.1, 48, 88.2 or 96 kHz. The interface automatically detects a valid input on the S/PDIF (optical or coaxial) or AES/EBU…
The RDL SF-NL2 is a two channel Dante Network to Analog Audio interface designed for use in both installed and portable systems. Each of the two balanced XLR outputs are switch-selectable for Mic or Line level operation and are protected from phantom voltages of up to 48 Vdc. The interface is constructed in a steel…
The SF-NH1 Dante enabled Stereo Headphone Amplifier can be used as a troubleshooting tool to quickly confirm that a port on a switch is properly configured for the Dante network simply by receiving audio. Setup: Using Dante Controller, apply a static IP address to the amplifier and route an active audio signal to its Left…
RDL is pleased to announce the immediate availability of five new wall-mounted Dante audio network interface products. These bi-directional products interface microphone and line level audio with a Dante network and are packaged in a dual-Decora® form factor. Each product is available in white, stainless steel or black. DD-BN22 – Converts two mic or line…
