RDL Dante Products – Automatic Gain Adjustment for Dynamic and Condenser Microphones

RDL Dante Products – Automatic Gain Adjustment for Dynamic and Condenser Microphones

RDL Dante Products – Automatic Gain Adjustment for Dynamic and Condenser Microphones

Comments Off on RDL Dante Products – Automatic Gain Adjustment for Dynamic and Condenser Microphones

The RU-MLB series of Dante bidirectional interfaces provide independently switch-selectable mic or line inputs and line-level outputs.  They are available in 2 and 4 channel versions with or without PoE.

When an input is set to receive microphone signals, the module provides P48 phantom for operation of balanced condenser microphones. When a condenser microphone is connected to an input, gain is automatically set to 40 dB. If a dynamic microphone is then connected to the same input, gain will be automatically adjusted to 60 dB. No user intervention is required to change gain settings when selecting between condenser and dynamic microphones.

When selected for line-level input, the BALANCED terminals accept a +4 dBu source. The UNBALANCED terminals are for connection of consumer sources with a nominal operating level of -10 dBV.

Each input and output is represented on the front panel by a variable intensity LED Signal Present indicator to assist with system set-up.

RU-MLB2 Mic/Line Bi-Directional Dante Network Interface – 2 In x 2 Out


 

RU-MLB2P Mic/Line Bi-Directional Dante Network Interface – 2 In x 2 Out w/PoE


 

RU-MLB4 Mic/Line Bi-Directional Dante Network Interface – 4 In x 4 Out


 


RU-MLB4P Mic/Line Bi-Directional Dante Network Interface – 4 In x 4 Out w/PoE


 

Related Posts

Back to Top