RDL®

RU-SH1

Stereo Headphone Amplifier - RACK-UP Series

SKU: RU-SH1
  • Rack-Mounted Headphone Amplifier
  • RACK-UP® Series Headphone Amplifier
  • Integral Long-Life VCA Stereo Level Control
  • Balanced or Unbalanced Inputs
  • Switch-Selectable Input Sensitivity
  • Switch-Selectable Mono (Left) or Stereo Operation
  • Amplifier To Drive High or Low Impedance Headsets
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The RU-SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The module mounts in RACK-UP series rack mounts or in various RDL® mounting accessories. The RU-SH1 is a dual channel headphone amplifier with balanced/unbalanced left and right inputs. Each input accepts operating levels between -20 dBV and +20 dBu. Two recessed slide switches located on the top of the rear enclosure are set prior to mounting the module. One switch is provided for setting the input sensitivity. The mode switch selects between stereo and mono operation. In the mono position, the left input is used to drive both output channels. When the module is used in a monaural system, only the left channel input must be wired. The front panel level control is a long-life potentiometer controlling matched VCAs. Audio does not pass through this control, assuring years of noise-free level adjustment. The output amplifiers deliver more than 50 mW into either high or low impedance headphones through a durable, metal 1/4" (6.3 mm) standard headphone jack. Module operation is from a 24 Vdc ground-referenced power supply. It can also operate from a 12 Vdc supply with a 6 dB reduction in headroom and a maximum output power of 10 mW.

    Specifications

    Inputs (2):10 kΩ balanced or unbalanced bridging
    Input Level:+4 dBu nominal (Low input sensitivity)
    -15 dBV nominal (High input sensitivity)
    Maximum Input Level:+21 dBu (Low input sensitivity);
    +3 dBu (High input sensitivity)
    Output Signal (normal rated):10 mW into 100 Ω
    Output Signal (maximum):50 mW into 100 Ω
    THD+N:< 0.5% @ 1 kHz
    Frequency Response:30 Hz to 20 kHz (± 2 dB)
    Noise: 60 dB (50 to 120 Hz)
    Crosstalk:Below noise floor (20 Hz to 20 kHz)
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 50 mA
    Package Type:Cardboard Box
    Package Dimensions:6.75 x 2.25 x 2 in.
    Shipping Weight:0.555 lbs.
    WEEE weight:0.43 lbs.
    Tariff code:8543.70.9860

    Related Products

    Headphone Amplifiers
    • D-SH1

      Stereo Headphone Amplifier - Decora® panel with user level control

      Customizable Text

    • D-SH1M

      Stereo Headphone Amplifier

      Customizable Text

    • DS-SH1

      Stereo Headphone Amplifier - Decora® panel with user level control

      Customizable Text

    • DS-SH1M

      Stereo Headphone Amplifier

      Customizable Text

    • ST-SH2

      Stereo Headphone Amplifier - STICK-ON Series

    Related Products

    DIN Rail Mounting Accessories
    Rack-Up® Mounting Accessories
    • UC-2R

      Double Wide RACK-UP Enclosure

    • WDG1R

      Table Top "Wedge" Chassis

    • UC-1R

      RACK-UP Enclosure

    • RU-RA3R

      Rack adapter for RACK-UP series

    • RU-HRA1

      10.4" Rack Mount for 1 RACK-UP Series Product

    • RU-SMA1

      RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface

    • RU-BR1

      Mounting Bracket for RACK-UP Series

    General Wiring Accessories
    • RC-1UR

      19" Universal Rack Chassis

    Dimensions

    RU-SH1

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican4 KBDXF
    Panel Diagram - FrontAmerican5.59 KBDXF
    Panel Diagram - RearAmerican12.94 KBDXF
    Panel Diagram - FrontMetric5.58 KBDXF
    Panel Diagram - RearMetric13.15 KBDXF
    High Res ImagesFormat
    ru-sh1.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close