RDL®

FP-PA20B

20 W Mono Audio Amplifier - 25 V

SKU: FP-PA20B
  • 20 Watts RMS Constant Voltage Amplifier
  • 25 V Output
  • Integral Audio Compressor to Control Clipping
  • High Overall Operating Audio Level
  • Maximized Audio Level for Output Power
  • Audio Quality Superior to Standard Amplifiers
  • Category:

    Description

    The FP-PA20B features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. A 25 V amplified output is provided to drive corresponding speakers in a distributed sound system. Audio levels that could cause the amplified output to clip are compressed using two dynamic time constants designed to preserve aural transparency. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics and preventing the compressor from increasing feedback potential when the amplifier is used for paging. The FP-PA20B produces average audio levels and audio clarity normally expected of amplifiers delivering much higher output power.

    Specifications

    Input:Line level (+4 dBu bal; -10 dBV unbal)
    Input Impedance:20 kΩ balanced bridging; 10 kΩ unbal
    Input / Output Connector:Plug-in terminal block
    Gain Adjustment:Single turn audio taper
    Minimum Input Levels:Balanced: -26 dBu (to cross compressor threshold)
    Unbalanced: -28 dBV (to cross compressor threshold)
    Maximum Input Levels:Balanced: +23 dBu
    Unbalanced: +15 dBV
    Frequency Response:50 Hz to 18 kHz (± 3 dB)*
    THD+N:
    *measured at compressor threshold level equaling 4 W RMS output power.
    < 0.1% (@ 1 kHz)*
    < 0.5% (50 Hz to 20 kHz)*
    Noise: 55 dB (50 Hz to 120 Hz)
    Output Power:20 W RMS @ 25 V
    Ambient Operating Environment:0° C to 30° C Max; 20° C Recommended
    Indicators (2):Red LED: PEAK LED indicates compressor activity
    Green LED: Power ON
    Power Requirement:24 Vdc @ 1650 mA, Ground referenced(for continuous RMS power output)
    24 Vdc @ 1000 mA, Ground referenced (for normal uncompressed audio)
    Overall Dimensions:Height: 2.3 in. (5.85 cm); Width: 3.25 in. (8.26 cm); Length: 6 in. (15.3 cm)
    Package Type:Cardboard Box
    Package Dimensions:4.375 x 7 x 2.25 in.
    Shipping Weight:2.41 lbs.
    WEEE weight:2.195 lbs.
    Tariff code:8543.70.9810

    Related Products

    Flat-Pak™ Mounting Accessories
    • FP-HRA

      10.4" Rack Mount for FLAT-PAK Series Products

    • FP-RRB1

      Rear rack rail mounting kit for any FLAT-PAK module

    • FP-RRA

      Rack Adapter FLAT-PAK Series - 19" Fixed

    • FP-RRAH

      Rack Adapter FLAT-PAK Series - 19" Hinged

    DIN Rail Mounting Accessories

    Dimensions

    FP-PA20B

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican9.08 KBDXF
    Panel Diagram - FrontAmerican6.62 KBDXF
    Panel Diagram - FrontMetric6.87 KBDXF
    High Res ImagesFormat
    fp-pa20b.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close