| Recommended Power Supply ( Not Included ) | |
|---|---|
| PS-24V3A (USA) | PS-24V3 (International) |
| Audio Input, paging: | 100 kΩ balanced or unbalanced line level, detachable terminal block |
| Audio Inputs, switched (8): | 100 kΩ balanced or unbalanced line level, detachable terminal block |
| Audio Input Level: | -22 dBu to +4 dBu nominal (+22 dBu max.), 25-turn adjustable pot |
| Control Input: | Paging Terminal; External closure to ground to activate |
| Front Panel Presets: | DIP switch to set number of inputs used |
| Metering: | 1 Green LED (intensity indicates audio level) ; 1 Red LED (indicates 0 dB audio level) |
| Frequency Response: | 50 Hz to 35 kHz (±1 dB) |
| THD+N: | < 0.1% @ 1 KHz (bandwidth 20 Hz to 20 kHz) |
| Output, bus: | 24-pin ribbon cable header loop-thru output to drive SAS-82 or SAS-8C |
| Outputs (4): | 6-position detachable terminal blocks (connection to remote Listening Station) |
| Audio Output Gain Range: | 40 dB (trimmer presettable) |
| Indicators: | LED; Output voltage present at Remote Outputs |
| Power Requirement: | 24 Vdc @ 1 A, Ground-referenced |
| Ambient Operating Environment: | 0° C to 50° C |
| Package Type: | Cardboard Box |
| Tariff code: | 8543.70.9860 |
| WEEE weight: | 3.615 lbs. |
| Shipping Weight: | 4.185 lbs. |
| Package Dimensions: | 20.5 x 6.75 x 2.25 in. |
Audio Input Chassis for SourceFlex Distributed Audio System
19" Utility Rack Chassis - 2 RU
| Documents | Format |
|---|---|
| Datasheet |
| CAD Files | Units | Format |
|---|---|---|
| Engineering Functional Block | American | DXF |
| Panel Diagram - Front | American | DXF |
| Panel Diagram - Rear | American | DXF |
| Panel Diagram - Front | Metric | DXF |
| Panel Diagram - Rear | Metric | DXF |
| High Res Images | Format |
|---|---|
| sas-8c.zip | TIF |
| sas-8c_rear.zip | TIF |
| Declaration of Conformity |
|---|
| Download |
Participants Listen to Translations using SourceFlex System
Headphone Amplifier with Source Selection for SourceFlex Distributed Audio System
Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:
| Company | Address | Phone | Link |
|---|
