RDL®

FP-TP4PW

Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

SKU: FP-TP4PW
  • Power Four Sets of Remote Senders and Receivers from a Convenient Location
  • 24 Vdc Input on dc Power Jack or Full-Size Terminal Block
  • Power Bus Provides Expansion to Adjacent Power Inserters
  • Blue Power LED Shows Module is Receiving Power
  • Green LEDs Indicate Correct dc Output Voltage on RJ45s
  • Two Associated RJ45s Provided for Each Power Output
  • One Associated RJ45 may Power Receivers
  • The Other Associated RJ45 may Power Senders
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The FP-TP4PW is a four output power inserter compatible with RDL twisted pair products. It is powered from a 24 Vdc power supply using either one of the power jacks or the terminal block. Power jacks are provided at each end of the module to facilitate chaining multiple FP-TP4PWs from a single power supply. Four dual-RJ45 jack sets are provided to connect remote twisted pair senders and receivers. Power is provided to all modules connected to the RJ45 jacks. Signal pairs feed through the associated RJ45s. The voltage feeding each dual-RJ45 jack set is separately protected by an automatically resetting fuse. A power LED is associated with each dual-RJ45 jack set, facilitating identification of wiring faults. Module power is indicated by a front-panel LED.

    Specifications

    Outputs (4):Dual-RJ45
    Indicators (5):Power In (1); Power Out (4)
    Power Connections (3):Power Jack (2); Terminal Block
    Ambient Operating Environment:0° C to 55° C
    Maximum Load Current:200 mA (each RJ45 output)
    Power Requirement:24 Vdc @ 25 mA plus connected loads
    Dimensions:5.65" (13.56 cm) W; 3.25" (8.26 cm) H; 1.11" (2.67 cm) D
    Package Type:Cardboard Box
    Package Dimensions:4.375 x 7 x 2.25 in.
    Shipping Weight:0.87 lbs.
    WEEE weight:0.605 lbs.
    Tariff code:8543.70.9860

    Related Products

    Format-A® Receivers
    • D-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

      Customizable Text

    • D-TPR2A

      Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

      Customizable Text

    • D-TPR3A

      Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

      Customizable Text

    • DS-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp

      Customizable Text

    • DS-TPR2A

      Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs

      Customizable Text

    • DS-TPR3A

      Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

      Customizable Text

    • Format-A twisted pair receiver to balanced line output

      TX-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

    • TX-TPR3A

      Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

    • TX-TPR6A

      Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

    Format-A® Senders
    • D-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom

      Customizable Text

    • D-TPS2A

      Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

      Customizable Text

    • D-TPS3A

      Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA in

      Customizable Text

    • DS-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone input w pha

      Customizable Text

    • DS-TPS2A

      Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs

      Customizable Text

    • DS-TPS3A

      Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone & stereo

      Customizable Text

    • TX-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

    • TX-TPS3A

      Active Three-Pair Sender - Twisted Pair Format-A - Balanced line inputs

    • TX-TPS6A

      Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

    Format-A® Mixers
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Mixing
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Power Inserters / Breakout
    • RU-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    • TX-TP1PW

      Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through

    Format-A® Distributors
    • RU-TPDA

      Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

    • RU-TPS4A

      Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

    Related Products

    Flat-Pak™ Mounting Accessories
    • FP-HRA

      10.4" Rack Mount for FLAT-PAK Series Products

    • FP-RRB1

      Rear rack rail mounting kit for any FLAT-PAK module

    • FP-RRA

      Rack Adapter FLAT-PAK Series - 19" Fixed

    • FP-RRAH

      Rack Adapter FLAT-PAK Series - 19" Hinged

    DIN Rail Mounting Accessories

    Dimensions

    FP-TP4PW

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican4.24 KBDXF
    Panel Diagram - FrontAmerican12.6 KBDXF
    Panel Diagram - FrontMetric12.93 KBDXF
    High Res ImagesFormat
    fp-tp4pw.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close