RDL®

TX-TPR3A

Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

SKU: TX-TPR3A
  • Three -10 dBV Unbalanced or +4 dBu Balanced Outputs
  • Phono Jack and Detachable Terminal Block Outputs
  • Audio Outputs for All Three Pairs (A, B and C)
  • Utilizes All Three Format-A Pairs
  • Powered Locally or Remotely through RJ45 Jack
  • Local Power Feeds all Modules Connected to INPUT
  • Wiring Fault Protection by Automatic Resetting Fuse
  • Local Power Input on Terminal Block or dc Power Jack
  • Blue LED Indicates Module is Powered
  • Studio-Quality Precision Active Balanced Circuitry
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The TX-TPR3A is a three-pair audio receiving module compatible with RDL Format-A twisted pair products. Three outputs are provided corresponding to the three signal pairs A, B and C. The audio signal received on each pair of the RJ45 INPUT jack feeds the corresponding -10 dBV unbalanced RCA phono jack output and the +4 dBu balanced detachable terminal block output. A studio-quality buffer amplifier feeds the outputs at the correct operating level.

    The TX-TPR3A features bridging inputs, allowing it to be connected to the LOOP OUT jack of other receivers. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products.

    The TX-TPR3A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the INPUT RJ45 jack. The TX-TPR3A may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.

    Specifications

    Input:RDL TP Format-A
    Input Connection:RJ45
    Format-A Signal Pairs Used (3):A, B, C
    Outputs (6):150 Ω Balanced (3); 1 kΩ Unbalanced (3)
    Output Connection:Detachable Terminal Block (Bal); RCA (Unbal)
    Output Level:+4 dBu Bal., +22 dBu Max; -10 dBV Unbal.
    Frequency Response:10 Hz to 50 kHz (± 0.1 dB)
    THD+N:< 0.005%
    Noise below +4 dBu:< 90 dB
    Crosstalk:< 90 dB (1 kHz); 18 dB
    CMRR:> 80 dB (50 Hz to 150 Hz)
    Indicator:Power In
    Power Connections (3):Power Jack; Detachable Terminal Block; RJ45
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:24 Vdc @ 65 mA plus connected loads
    Dimensions:3.0" (7.6 cm) W; 1.6" (4.08 cm) H; 2.09" (5.3 cm) D
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.49 lbs.
    WEEE weight:0.435 lbs.
    Tariff code:8543.70.9860

    Related Products

    Power Inserters / Breakout
    • FP-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    • RU-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    • TX-TP1PW

      Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through

    Format-A® Mixers
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Mixing
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Format-A® Distributors
    • RU-TPDA

      Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

    • RU-TPS4A

      Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

    Format-A® Receivers
    • Format-A twisted pair receiver to balanced line output

      TX-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

    • TX-TPR6A

      Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

    Format-A® Senders
    • TX-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

    • TX-TPS3A

      Active Three-Pair Sender - Twisted Pair Format-A - Balanced line inputs

    • TX-TPS6A

      Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

    Related Products

    General Mounting Accessories
    • MB-2

      Mounting Kit - RU and TX Series

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • MB-3

      Kit to Mount ST, TX Series Modules on FP Panel

    DIN Rail Mounting Accessories
    TX™ Mounting Accessories
    • TX-HRA3

      10.4" Rack Mount for 3 TX Series Products

    • TX-RRB1

      Rear rack rail mounting kit for any TX series module

    • TX-RA5

      TX Series 19" Racking System - 5 modules 1RU

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • DRA-35T

      TX Series DIN Rail Adapter

    Pole Mounting Accessories
    Accessories
    • RC-HPS1

      10.4" Rack Mount for Desktop Power Supply and TX Module

    Dimensions

    TX-TPR3A

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.96 KBDXF
    Panel Diagram - FrontAmerican9.45 KBDXF
    Panel Diagram - FrontMetric9.68 KBDXF
    High Res ImagesFormat
    tx-tpr3a.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close