RDL®

TX-TPS6A

Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

SKU: TX-TPS6A
  • Single +4 dBu Low-Impedance Balanced Audio Input
  • Input on Detachable Terminal Block
  • Switch Selects which RJ45 Pair (A, B or C) is Fed
  • Signal and Power Pair Pass-Through from LOOP IN Jack
  • Passive Circuitry Does Not Require Power
  • Galvanic Isolation through a Studio-Quality Transformer
  • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
  • Description

    The TX-TPS6A is a single-pair audio sending module compatible with RDL Format-A twisted pair products. One low-impedance +4 dBu balanced line-level audio source connects to the module using the detachable terminal block. A studio-quality transformer provides isolation between the audio source and the RJ45 OUTPUT.

    The TX-TPS6A is a single-pair sender, feeding the input signal to the cable pair set on the front-panel switch during installation. This module drives only one cable pair, therefore a LOOP IN RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to the LOOP IN jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The TX-TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C.

    The TX-TPS6A is a passive module that does not require power to operate. If power is present on a cable connected to the LOOP IN jack, that power is passed through to the modules connected to the OUTPUT jack.

    Specifications

    Input:Low-impedance Balanced; Recommended source impedance < 150 Ω
    Input Connection:Detachable Terminal Block (Balanced)
    Input Level:+4 dBu balanced; +22 dBu Max
    Format-A Signal Pair Used:Switch-selectable A, B, or C
    Format-A Input:RJ45 LOOP IN
    Output:RDL TP Format-A
    Output Connection:RJ45
    Frequency Response:20 Hz to 20 kHz (± 0.1 dB)
    THD+N:< 0.035% (50 Hz to 20 kHz, +4 dBu); 18 dB
    CMRR:> 85 dB (50 Hz to 150 Hz)
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:Passive
    Dimensions:3.0" (7.6 cm) W; 1.6" (4.08 cm) H; 2.09" (5.3 cm) D
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.89 lbs.
    WEEE weight:0.74 lbs.
    Tariff code:8543.70.9860

    Related Products

    Power Inserters / Breakout
    • FP-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    • RU-TP4PW

      Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

    Format-A® Mixers
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Mixing
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Format-A® Distributors
    • RU-TPDA

      Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

    • RU-TPS4A

      Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

    Format-A® Receivers
    • Format-A twisted pair receiver to balanced line output

      TX-TPR1A

      Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

    • TX-TPR3A

      Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

    • TX-TPR6A

      Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

    Format-A® Senders
    • TX-TPS1A

      Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

    Related Products

    Pole Mounting Accessories
    Accessories
    • RC-HPS1

      10.4" Rack Mount for Desktop Power Supply and TX Module

    DIN Rail Mounting Accessories
    TX™ Mounting Accessories
    • TX-HRA3

      10.4" Rack Mount for 3 TX Series Products

    • TX-RRB1

      Rear rack rail mounting kit for any TX series module

    • TX-RA5

      TX Series 19" Racking System - 5 modules 1RU

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • DRA-35T

      TX Series DIN Rail Adapter

    General Mounting Accessories
    • MB-2

      Mounting Kit - RU and TX Series

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    • MB-3

      Kit to Mount ST, TX Series Modules on FP Panel

    Dimensions

    TX-TPS6A

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican4.07 KBDXF
    Panel Diagram - FrontAmerican6.73 KBDXF
    Panel Diagram - FrontMetric6.98 KBDXF
    High Res ImagesFormat
    tx-tps6a.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close