RDL®

TS-1D

Transient Suppressor

SKU: TS-1D
  • Immunity from Electrostatic Discharge
  • Immunity from Induced Transient Voltage
  • Immunity from RF Interference
  • Immunity from Electromagnetic Pulse
  • CE Compliance
  • Category:

    Description

    The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines.

    Specifications


    AUDIO
    Frequency Response:10 Hz to 50 kHz (± 0.25 dB)
    Insertion Loss:<0.3 dB (into balanced bridging input), <1.0 dB (into 150 Ω or 600 Ω balanced< input), < 6 dB (600 Ω balanced source into 600 Ω load)

    ELECTRICAL
    Number of Circuits:4, independent (for connection as 4 unbalanced or 2 balanced audio lines)
    Equivalent Series Resistance, Input to Output: 20 Ω
    Equivalent Circuit:300 kHz LP filter, 6 dB/octave, integral shunt high-voltage switch
    Maximum Working Signal:30 Vp, 60 V p-p
    HV Switch Clamp:24 V actuation; 48 V maximum
    Transient Energy:0.1 joule

    PHYSICAL
    Case Material:Electromagnetically inert plastic composition
    Size:1.75 in. W x 2.5 in. L x 0.9 in. H (4.45 cm x 6.35 cm x 2.29 cm) (including terminal strip)
    Ground Bus (integral):110 alloy copper, 0.25" W x 1.6" L (.64 cm x 4.1 cm) with 2 mounting holes, #6 (.37 cm) clearance, mounting hardware included
    Input/Output Termination:#6 (.35 cm) captive screw terminals
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.245 lbs.
    WEEE weight:0.185 lbs.
    Tariff code:8543.70.9860

    Related Products

    EMC
    • GB6

      Grounding Bar for TS-1D Modules

    Dimensions

    TS-1D

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.87 KBDXF
    Panel Diagram - FrontAmerican5.98 KBDXF
    Panel Diagram - FrontMetric6.27 KBDXF
    High Res ImagesFormat
    ts-1d.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close