RDL®

DS-A2

Line Output Assembly

SKU: DS-A2
  • Wall Mounted Consumer Level Outputs
  • Single or Dual Outputs from Mono Source
  • Gold Plated Phono Jack Outputs
  • Transformer Isolation from Source
  • Audio Outputs from any RDL Line Output
  • High Attenuation of Reverse Signals
How to Customize
Category:

Description

The D SERIES-A2 is a passive audio output assembly that provides one or two unbalanced consumer level audio outputs from a balanced line-level audio source. It may be connected to the +4 dBu line level output of any RDL product, even if that output is simultaneously feeding other equipment. The D SERIES-A2 circuit design provides a high degree of audio isolation if a user accidentally feeds a consumer-level source into the D SERIES-A2. The attenuation of such reverse signals is sufficient for most installations. Active RDL modules are available for complete isolation if required. The D SERIES-A2 output jacks are transformer isolated from the balanced line input, and the input shield is separated from the case ground to reduce the possibility of induced hum. The D SERIES-A2 is not intended as an audio input panel.

The D SERIES-A2 fits directly into back boxes, available from RDL, to fit cabinets or US or international walls (RDL WB-1U). It may also be mounted directly into cabinets or most standard US single gang electrical boxes.

Specifications

Input Level:+4 dBu, nominal
Input Connector:Full size barrier block
Input Impedance:10 kΩ balanced bridging, monaural
Output Connectors (2):Phono jacks with gold contacts
Input Connections (4):CASE GROUND, SHIELD, + , -
Frequency Response:50 Hz to 20 kHz (±1 dB)
Attenuated Signal-Reverse Path:< -50 dB (at 150 Ω balanced source output, +4 dBu reference, -10 dBV signal injected into output jack)
Power Requirement:Passive
Dimensions:Height: 4.13 in. 10.49 cm; Width: 1.7 in. 4.32 cm; Depth: 2.15 in. 5.47 cm
Mounting Box Req.:Width: 1.80 in. 4.57 cm; Depth: 1.75 in. 4.45 cm
Package Type:Cardboard Box
Package Dimensions:3.625 x 4.625 x 2.125 in.
Shipping Weight:0.465 lbs.
WEEE weight:0.31 lbs.
Tariff code:8536.69.4030

Related Products

Connector Plates
  • D-A2

    Line Output Assembly

    Customizable Text

  • DB-A2

    Line Output Assembly

    Customizable Text

Transformer Products
  • TX-A2

    Audio Converter - Balanced to Unbalanced

  • TX-A2D

    Dual Audio Converter - Balanced to Unbalanced

Related Products

General Mounting Accessories
  • CP-4S

    Quadruple Cover Plate - stainless steel

  • CP-4

    Quadruple Cover Plate - white

  • CP-4G

    Quadruple Cover Plate - gray

  • CP-3S

    Triple Cover Plate - stainless steel

  • CP-3G

    Triple Cover Plate - gray

  • CP-2S

    Double Cover Plate - stainless steel

  • CP-3

    Triple Cover Plate - white

  • CP-1S

    Single Cover Plate - stainless steel

  • DC-4W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-4G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-3G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-2G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-3W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-1W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-2W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-1G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • SMB-4G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-3G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-2G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-4W

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-3W

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-2W

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-1G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-1W

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • RM-D9

    19" Rack Mount for 9 Decora® Modules

  • RM-D3

    19" Rack Mount for 3 Decora® Modules

  • CP-2G

    Double Cover Plate - gray

  • CP-1G

    Single Cover Plate - gray

  • WB-2U

    Universal Wall Box - Double - Mounts RDL remote controls & wall plates

  • CP-2

    Double Cover Plate - white

  • WB-1U

    Universal Wall Box - Single - Mounts RDL remote controls & wall plates

  • CP-1

    Single Cover Plate - white

Dimensions

DS-A2

Downloads

DocumentsFormat
DatasheetPDF
CAD FilesUnitsSizeFormat
Engineering Functional BlockAmerican4.03 KBDXF
Panel Diagram - FrontAmerican7.89 KBDXF
Panel Diagram - RearAmerican7.77 KBDXF
Panel Diagram - FrontMetric8.1 KBDXF
Panel Diagram - RearMetric7.83 KBDXF
High Res ImagesFormat
ds-a2.zipTIF
Declaration of Conformity
Download

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink
Shopping cart close