RDL®

STM-1

Microphone Preamplifier - 50 dB Gain

SKU: STM-1
  • High or Low Impedance Input Mic Preamp
  • Fixed 50 dB Gain for Consistency
  • Balanced or Unbalanced Output
  • Phantom Capability
  • RF-Filtered Inputs and Outputs
  • Excellent Performance
  • STICK-ON® Convenience
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)

    Description

    The STM-1 is a low-cost quality microphone preamplifier designed for use in commercial sound and broadcast applications. The compact size makes it ideal where a larger or heavier preamp cannot be used. The high-performance circuit provides a fixed 50 dB gain to bring any mic-level signal up to the line-level range of nearly any line input. The STM-1 supply input is single ended and operates from 24 Vdc. Operation from 12 Vdc is possible with a 6 dB reduction in headroom. For intercom applications, the input will operate directly from a speaker

    Some features of the STM-1 are:
    - Balanced microphone input accepts dynamic or condenser microphones
    - Input circuitry permits connection of unbalanced microphones, and 4 or 8  speakers in intercom ormonitoring applications
    - Fixed 50 dB gain and ample headroom allow operation with any mic
    - Phantom supply input terminals allow connection of phantom power when STM-1 is used with condenser microphones
    - Ground-referenced supply input operates from 24 Vdc to 33 Vdc (12 Vdc at reduced headroom)
    - Separate balanced and unbalanced line-level outputs
    - No lugs required for reliable connections
    - Convenience of STICK-ON package yields quick, efficient installation

    Specifications

    Input:500 Ω balanced; 5 kΩ unbalanced
    Phantom:24 Vdc; IEC 61938: 2013, Filtered
    Outputs (2):+4 dBu 150 Ω balanced; -10 dBv unbalanced
    Frequency Response:50 Hz to 30 kHz (± 1.5 dB)
    Gain:50 dB nominal
    THD+N:50 dB (50 Hz to 20 kHz)
    Residual Noise: 20 dB (24 Vdc supply);
    > 14 dB (12 Vdc supply)
    Phantom Power Input:24 Vdc @ 10 mA maximum
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 25 mA
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.195 lbs.
    WEEE weight:0.145 lbs.
    Tariff code:8543.70.9860

    Related Products

    Microphone Products
    • EZ-MPA1

      Microphone Preamplifier - Stereo Output with Compressors

    • EZ-MPA2

      Dual Microphone Preamplifier - Stereo Output with Compressors

    • FP-MP1

      Studio Quality Microphone Preamplifier with Phantom - Terminal block & XLR

    • FP-MPA2

      Dual Microphone Phantom Adapter 12, 24, 48 V - XLR

    • HR-MP2

      Dual Microphone Preamplifier

    • HR-MP2A

      Dual Microphone Preamplifier

    • RU-MLA2

      Dual Microphone / Line Preamplifier

    • STM-2

      Adjustable Gain Microphone Preamplifier - 35 to 65 dB gain

    • STM-LDA3

      Studio Quality Microphone Preamplifier with phantom - 3 line outputs

    Power Amplifiers
    • ST-MA2

      2 W Mono Audio Amplifier with Muting - 8 Ω

    Related Products

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    Dimensions

    STM-1

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.93 KBDXF
    Panel Diagram - EndAmerican3.12 KBDXF
    Panel Diagram - FrontAmerican58.12 KBDXF
    Panel Diagram - EndMetric2.98 KBDXF
    Panel Diagram - FrontMetric59.87 KBDXF
    High Res ImagesFormat
    stm-1.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close