RDL®

RU-ADA4D

Audio Distribution Amplifier

SKU: RU-ADA4D
  • Stereo Audio Distribution with 4 Outputs
  • Mono Audio Distribution with 8 Outputs
  • Front-Panel Input Level Trimmers
  • Dual-LED VU Meter for Each Input Channel
  • Front-Panel Output Level Trimmers
  • Inputs and Outputs on Rear Panel Detachable Terminal Blocks
  • Exceptional Audio Quality for the Most Demanding Applications
  • Recommended Power Supply
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The RU-ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to eight distributed mono signals. The inputs and outputs are connected on rear-panel detachable terminal blocks.

    Each of the two line level inputs accepts either a balanced or an unbalanced signal. Each input is equipped with a front panel INPUT GAIN trimmer. Input signal levels between -14 dBV unbalanced and +9 dBu balanced may be set to the proper operating level as indicated by a dual-LED VU meter. This assures ample headroom at all normal operating levels. The maximum input level is + 25 dBu.

    A rear-panel switch selects between stereo and mono operation. In the mono position, input A (left) is used to drive all 8 output channels. When the module is used in a monaural system, only input A must be wired.

    The RU-ADA4D offers exceptional headroom, very low distortion, excellent crosstalk isolation, wide flat frequency response and extremely low noise with very high common-mode signal rejection. It provides exceptional audio performance for the most critical applications in a professional audio environment.

    The RU-ADA4D operates from 24 Vdc connected through a rear-panel detachable terminal block.

    Specifications

    Inputs (2):Stereo (A/left and B/right) on detachable terminal block
    Input Impedance:20 kΩ balanced or 10 kΩ unbalanced
    Input Level:+4 dBu balanced (nominal), +25 dBu maximum; -10 dBV unbalanced
    Input Gain Adjustments (2):-5 dB to +15 dB (rel. +4 dBu balanced); -3 dB to +17 dB (rel. -10 dBV unbalanced)
    Input Metering (2):Dual-LED VU Meter for Input A and Input B
    Mono mode:Rear-panel switch-selectable (input A feeds all 8 outputs)
    Outputs (8):Stereo, A (4), B (4) on detachable terminal blocks
    Output Impedance:150 Ω balanced; 75 Ω unbalanced
    Output Level:+4 dBu balanced (nominal), +24 dBu maximum; -10 dBV unbalanced
    Output Level Adjustments (8):-9 dB to +6 dB (rel. +4 dBu, balanced); -3 dB to + 12 dBu (rel. -10 dBV, unbalanced)
    Frequency Response:10 Hz to 165 kHz (+/- 0.25 dB); 10 Hz to 35 kHz (+/- 0.01 dB)
    THD+N:< 0.0025% (20 Hz to 20 kHz)
    Headroom:> 20 dB (above +4 dBu input or output)
    Noise:< -92 dB (below +4 dBu output, 20 Hz to 20 kHz)
    Crosstalk:< -90 dB (20 Hz to 5 kHz); <-80 dB (5 kHz to 20 kHz)
    CMRR:> 90 dB (100 Hz)
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:GROUND REFERENCED, 24 Vdc @ 82 mA (idle, nominal), 120 mA (max.)
    Case dimensions:5.75" (14.6 cm)W x 1.65" (4.18 cm)H x 3.54" (9.0 cm)D; 3.9" (9.9 cm)D with connectors
    Package Type:Cardboard Box
    Package Dimensions:6 x 6 x 2.625 in.
    Shipping Weight:1.38 lbs.
    WEEE weight:1.13 lbs.
    Tariff code:8543.70.9860

    Related Products

    Distribution
    • EZ-ADA4

      Stereo Audio Distribution Amplifier - 1X4

    • RU-ADA8D

      Audio Distribution Amplifier

    • RU-UDA4

      Stereo Audio Distribution Amplifier - 2x4 - RCA jacks

    • ST-DA3

      Line Level Distribution Amplifier - 1x3

    Microphone Products
    • RU-MLA2

      Dual Microphone / Line Preamplifier

    Related Products

    General Wiring Accessories
    • RC-1UR

      19" Universal Rack Chassis

    Rack-Up® Mounting Accessories
    • UC-2R

      Double Wide RACK-UP Enclosure

    • WDG1R

      Table Top "Wedge" Chassis

    • UC-1R

      RACK-UP Enclosure

    • RU-RA3R

      Rack adapter for RACK-UP series

    • RU-HRA1

      10.4" Rack Mount for 1 RACK-UP Series Product

    • RU-SMA1

      RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface

    • RU-BR1

      Mounting Bracket for RACK-UP Series

    DIN Rail Mounting Accessories

    Dimensions

    RU-ADA4D

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican8.59 KBDXF
    Panel Diagram - FrontAmerican30.19 KBDXF
    Panel Diagram - RearAmerican20.48 KBDXF
    Panel Diagram - RearMetric20.48 KBDXF
    Panel Diagram - FrontMetric30.18 KBDXF
    High Res ImagesFormat
    ru-ada4d.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close