RDL®

FP-NML2

Network to Mic/Line Interface

SKU: FP-NML2
  • Adapts Standard Audio Amplifiers to a Dante Network
  • Converts Two Dante Network Audio Signals to Professional Line Level
  • Each Output is Switch-Selectable for Mic or Line Level
  • Line-Level Outputs Provide +4 dBu with > 18 dB Headroom
  • Exceptional Low-Noise and Low-Distortion Performance
  • Crosstalk is Below the Noise Floor
  • 24 Vdc Pass-Through Jack for Power Supply Sharing with RDL Amplifiers (FP-NML2)
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • Outputs Mute when Digital Audio Inputs are Inactive
  • Normal or Hot-Standby Operation from PoE (Model FP-NML2P)
  • Equipped for Rack Mounting or Surface Mounting
  • Recommended Power Supply
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The FP-NML2 modules are Dante audio network interface products compatible with mic-level or line-level audio equipment inputs. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.

    APPLICATION: The FP-NML2 is a high quality converter that provides professional line-level outputs from two Dante network audio channels. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. The professional output directly interfaces with other professional and commercial equipment without the need for additional gain. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. Each output is equipped with a recessed mic/line switch that provides 50 dB of attenuation to feed the microphone input of a mixer-amplifier or other equipment with mic inputs.

    The FP-NML2 is powered from an external 24 Vdc power supply, available separately. The FP-NML2P is equipped to operate from a PoE enabled network switch. The FP-NML2P will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.

    The FP-NML2 includes a dc output jack and extension cable that allows it to be operated from a common power supply with RDL FLAT-PAK amplifiers. One audio output connects to the FLAT-PAK amplifier input, and the second output may be connected to an additional amplifier.

    The FP-NML2’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems.

    The FP-NML2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

    Specifications

    Network Connector:RJ45 with Link and Speed indicators
    Digital Audio Ethernet Protocol:Dante
    Transmission Rate:100 Mbps
    Sample Rates Supported:44.1 kHz, 48 kHz (default)
    Bit Depth Supported:24 bits
    Audio Operating Levels:-18 dBFS = +4 dBu
    Outputs (2):Balanced, detachable terminal block
    Output Level:+4 dBu (nominal)
    Output Impedance:150 Ω balanced; 75 Ω unbalanced
    Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
    THD+N:< 0.1%
    Noise below +4 dBu:< -80 dB (output active); < -95 dB (outputs muted)
    Crosstalk:< 90 dB (1 kHz); 18 dB
    Indicators (3):Ethernet Link and Speed, SYNC
    Power Connections (2):Power Jack; 24 Vdc Pass-Through
    Ambient Operating Environment:0° C to 40° C
    Power Requirement:24 Vdc @ 100 mA, or PoE (FP-NML2P)
    PoE (FP-NML2P):Class 0, IEEE 802.3af
    Dimensions:4.85" (12.3 cm) W; 1.75" (4.45 cm) H; 3.25" (8.26 cm) D
    Package Type:Cardboard Box
    Package Dimensions:4.375 x 4.8 x 2.25 in.
    Shipping Weight:0.791 lbs. (FP-NML2); 0.816 lbs. (FP-NML2P)
    WEEE weight:0.645 lbs. (FP-NML2); 0.67 lbs. (FP-NML2P)
    Tariff code:8543.70.9100

    Related Products

    Dante™
    • FP-NML2P

      Network to Mic/Line Interface

    • FP-NML2V

      Network to Mic/Line Interface with VCA

    • FP-NML2VP

      Network to Mic/Line Interface with VCA

    • RU-BNF

      Format-A Bi-Directional Network Interface

    • RU-BNFP

      Format-A Bi-Directional Network Interface

    • RU-FN

      Format-A to Network Interface

    • RU-FNP

      Format-A to Network Interface

    • RU-LB2

      Line-Level Bi-Directional Network Interface

    • RU-LB2P

      Line-Level Bi-Directional Network Interface

    • RU-LB4

      Line-Level Bi-Directional Network Interface

    • RU-LB4P

      Line-Level Bi-Directional Network Interface

    • RU-MLB2

      Mic/Line Bi-Directional Network Interface

    • RU-MLB2P

      Mic/Line Bi-Directional Network Interface

    • RU-MLB4

      Mic/Line Bi-Directional Network Interface

    • Mic/Line Bi-Directional Dante Interface

      RU-MLB4P

      Mic/Line Bi-Directional Network Interface

    • RU-NFD

      Network to Format-A Interface/Distributor

    • RU-NFDP

      Network to Format-A Interface/Distributor

    • RU-NL2

      Network to Line Level Interface

    • RU-NL2P

      Network to Line Level Interface

    • RU-NL4

      Network to Line Level Interface

    • RU-NL4P

      Network to Line Level Interface

    Power Amplifiers
    • FP-PA18

      18 W Mono Audio Amplifier - 8 Ω, with Power Supply

    • FP-PA18H

      18 W Mono Hi-Temp Audio Amplifier - 8 Ω, with Power Supply

    • FP-PA20

      20 W Mono Audio Amplifier - 8 Ω

    • FP-PA20A

      20 W Mono Audio Amplifier - 70 V or 100 V

    • FP-PA20B

      20 W Mono Audio Amplifier - 25 V

    • FP-PA35A

      35 W Mono Audio Amplifier - 25 V, 70 V or 100 V, with Power Supply

    • HD-MA35A

      35 Watt Mixer Amplifier with Power Supply - Constant Voltage Output 25 V, 70 V or 100 V

    • HD-MA35U

      35 Watt Mixer Amplifier - 4 Ohm / 8 Ohm, with Power Supply

    • HD-MA35UA

      35 Watt Mixer Amplifier - 25, 70, 100 V, with Power Supply

    • HD-PA35

      35 Watt Power Amplifier with Power Supply - Low Impedance Output 4 Ohm or 8 Ohm

    • HD-PA35A

      35 Watt Power Amplifier with Power Supply - Constant Voltage Output 25 V, 70 V or 100 V

    • HD-RA35U

      35 Watt Remote Mixer Amplifier - 4 Ohm / 8 Ohm, with Power Supply

    • RU-PA40D

      40 W Stereo Audio Amplifier with VCA - 8 Ω, with Power Supply

    • RU-PA518

      10 W Stereo / 18 W Mono Audio Amplifier - 8 Ω

    • ST-PA18

      18 W Mono Audio Amplifier - 8 Ω

    • ST-PA2

      2 W Mono Audio Amplifier - 8 Ω

    • ST-PA6

      6 W Mono Audio Amplifier - 8 Ω

    • TX-PA40D

      40 W Stereo Audio Amplifier - 8 Ω, with Power Supply

    Dante™
    • FP-NML2P

      Network to Mic/Line Interface

    • FP-NML2V

      Network to Mic/Line Interface with VCA

    • FP-NML2VP

      Network to Mic/Line Interface with VCA

    • RU-BNF

      Format-A Bi-Directional Network Interface

    • RU-BNFP

      Format-A Bi-Directional Network Interface

    • RU-FN

      Format-A to Network Interface

    • RU-FNP

      Format-A to Network Interface

    • RU-LB2

      Line-Level Bi-Directional Network Interface

    • RU-LB2P

      Line-Level Bi-Directional Network Interface

    • RU-LB4

      Line-Level Bi-Directional Network Interface

    • RU-LB4P

      Line-Level Bi-Directional Network Interface

    • RU-MLB2

      Mic/Line Bi-Directional Network Interface

    • RU-MLB2P

      Mic/Line Bi-Directional Network Interface

    • RU-MLB4

      Mic/Line Bi-Directional Network Interface

    • Mic/Line Bi-Directional Dante Interface

      RU-MLB4P

      Mic/Line Bi-Directional Network Interface

    • RU-NFD

      Network to Format-A Interface/Distributor

    • RU-NFDP

      Network to Format-A Interface/Distributor

    • RU-NL2

      Network to Line Level Interface

    • RU-NL2P

      Network to Line Level Interface

    • RU-NL4

      Network to Line Level Interface

    • RU-NL4P

      Network to Line Level Interface

    Headphone Amplifiers
    • RU-SH1

      Stereo Headphone Amplifier - RACK-UP Series

    Related Products

    Flat-Pak™ Mounting Accessories
    • FP-HRA

      10.4" Rack Mount for FLAT-PAK Series Products

    • FP-RRB1

      Rear rack rail mounting kit for any FLAT-PAK module

    • FP-RRA

      Rack Adapter FLAT-PAK Series - 19" Fixed

    • FP-RRAH

      Rack Adapter FLAT-PAK Series - 19" Hinged

    DIN Rail Mounting Accessories

    Dimensions

    FP-NML2

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican22 KBDXF
    Panel Diagram - FrontAmerican22 KBDXF
    Panel Diagram - RearAmerican22 KBDXF
    Panel Diagram - FrontMetric22 KBDXF
    Panel Diagram - RearMetric22 KBDXF
    High Res ImagesFormat
    fp-nml2.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close