RDL®

RU-NFDP

Network to Format-A Interface/Distributor

SKU: RU-NFDP
  • Converts Four Dante Network Audio Signals to RDL Format-A and Aux
  • Easy Installation with Format-A Connections on RJ45 through CATx Cable
  • Three Dante Audio Signals Feed Format-A Output Pairs A, B and C
  • Fourth Dante Audio Signal Feeds Auxiliary Balanced +4 dBu Line Output
  • Format-A Pairs are Distributed to Three Separate Format-A Output Jacks
  • Signal LEDs Indicate Audio for Each of the Four Received Network Signal Channels
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • Powers Remote Format-A Receivers through Primary Output Jack
  • External 24 Vdc Supply Powers Format-A Receivers through All Output Jacks
  • LED Indicators Show Network Sync Status
  • Outputs Mute when Digital Audio Inputs are Inactive
  • Normal or Hot-Standby Operation from PoE (Model RU-NFDP)
  • Compatible with Wide Array of RDL Format-A Active and Passive Receivers
  • Equipped for Rack Mounting or Surface Mounting
Recommended Power Supply
PS-24AS (USA)PS-24AX (International)
Category:

Description

The RU-NFD modules are Dante audio network interface products compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in equipment racks, closets, conference tables and on shelves or backboards in commercial/industrial installations.

APPLICATION: The RU-NFD is an RDL Format-A sender/distributor that connects to a Dante-enabled network. It converts three Dante audio channels to RDL Format-A. Each network channel corresponds to Pair A, B or C of the Format-A outputs. The unit converts a fourth Dante audio channel to a balanced line-level AUX output.

One front-panel green signal LED corresponds to each of the four Dante input channels. Received audio level is indicated on the variable-intensity LED indicator, facilitating setup when a networked computer is not connected at the module’s location.

The Format-A output is distributed to three separate rear-panel RJ45 jacks. Each Format-A output jack provides up to 200 mA of power to connected Format-A receivers. Multiple receivers may be daisy chained from one output jack, or may be connected by home run to each of the three outputs. Higher current Format-A receivers, such as RDL D-PSP1A powered Decora-style speakers, are to be individually connected to a separate output jack.

The RU-NFD output jacks support the entire range of Format-A receivers, making each output pair available for end-user connection on various wall plates, or feeding other equipment using rack-mounted, shelf-mounted or utility Format-A receivers. The wide array of Format-A receivers provide compatibility with commercial audio equipment operating at standard professional levels. High resolution digital audio converters coupled with RDL’s renowned analog filters provide superior fidelity with a very low noise floor. Each Format-A receiver may be connected near the RU-NFD or up to several thousand feet distant.

The RU-NFD is powered from an external 24 Vdc power supply, available separately. The external supply powers the RU-NFD and Format-A receivers connected to all three Format-A outputs. The RU-NFDP is equipped for PoE which powers the RU-NFD and Format-A receivers connected to the primary Format-A output jack. Audio is also distributed to the other two output jacks. Remote Format-A receivers connected to those other two output jacks are only powered from the RU-NFDP if an external 24 Vdc power supply is connected. If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external 24 V supply. The power feeding each Format-A RJ45 connector is separately protected by an automatically resetting fuse. A power LED is associated with each connector, facilitating identification of wiring faults.

PoE relies on the use of a PoE enabled network switch. The RU-NFDP will reserve power from the switch even while being powered from an external 24 Vdc supply.

The RU-NFD is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Built to last. Built to outperform.

Specifications

Network Connector:RJ45 with Link and Speed indicators
Digital Audio Ethernet Protocol:Dante
Transmission Rate:100 Mbps
Sample Rates Supported:44.1 kHz, 48 kHz (default)
Bit Depth Supported:24 bits
Audio Operating Levels:-18 dBFS = +4 dBu
Format-A OutputsRDL Format-A RJ45 (3)
Format-A Signal Pairs Used (3):A, B, C (each Format-A output)
Frequency Response:20 Hz to 20 kHz (± 0.75 dB)
THD+N:< 0.1%
Noise below +4 dBu:< -85 dB (pair active); < -100 dB (pair muted)
Crosstalk: 18 dB

AUX Output
Output:Balanced, detachable terminal block
Output Level:+4 dBu (nominal)
Output Impedance:150 Ω balanced; 75 Ω unbalanced
Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
THD+N:< 0.1%
Noise below +4 dBu:< -75 dB
Crosstalk: 18 dB
Indicators (12):Power In (1); Power Out (3); Audio Signal LEDs (4), Network Sys and Sync (2), Ethernet Link and Speed (2)
Power Connections (2):Power Jack; Detachable Terminal Block
Ambient Operating Environment:0° C to 40° C
Power Requirement:24 Vdc @ 120 mA plus connected loads, or PoE (RU-FNP)
PoE (RU-NFDP):Class 0, IEEE 802.3af
Dimensions:5.8" (15 cm) W; 1.7" (4.3 cm) H; 5.2" (13.2 cm) D
Package Type:Cardboard Box
Package Dimensions:6 x 6 x 2.625 in.
Shipping Weight:1.63 lbs. (RU-NFD); 1.63 (RU-NFDP)
WEEE weight:1.37 lbs. (RU-NFD); 1.37 (RU-NFDP)
Tariff code:8543.70.9100

Related Products

Format-A® Receivers
  • D-HA1A

    Format-A Stereo Headphone Amplifier

    Customizable Text

  • D-TPA1A

    3.5 W Audio Power Amplifier

    Customizable Text

  • D-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

    Customizable Text

  • D-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

    Customizable Text

  • D-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

    Customizable Text

  • D-TPRX3A

    Three Input Format-A Source Selector

    Customizable Text

  • DB-HA1A

    Format-A Stereo Headphone Amplifier

    Customizable Text

  • DB-TPA1A

    3.5 W Audio Power Amplifier

    Customizable Text

  • DB-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

    Customizable Text

  • DB-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

    Customizable Text

  • DB-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

    Customizable Text

  • DB-TPRX3A

    Three Input Format-A Source Selector

    Customizable Text

  • DS-HA1A

    Format-A Stereo Headphone Amplifier

    Customizable Text

  • DS-TPA1A

    3.5 W Audio Power Amplifier

    Customizable Text

  • DS-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp

    Customizable Text

  • DS-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs

    Customizable Text

  • DS-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

    Customizable Text

  • DS-TPRX3A

    Three Input Format-A Source Selector

    Customizable Text

  • Format-A twisted pair receiver to balanced line output

    TX-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

  • TX-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

  • TX-TPR6A

    Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

Headphone Amplifiers
  • D-HA1A

    Format-A Stereo Headphone Amplifier

    Customizable Text

  • DB-HA1A

    Format-A Stereo Headphone Amplifier

    Customizable Text

  • DS-HA1A

    Format-A Stereo Headphone Amplifier

    Customizable Text

  • TP-HA1A

    Format-A Stereo Headphone Amplifier

Dante™
  • FP-NML2

    Network to Mic/Line Interface

  • FP-NML2P

    Network to Mic/Line Interface

  • FP-NML2V

    Network to Mic/Line Interface with VCA

  • FP-NML2VP

    Network to Mic/Line Interface with VCA

  • RU-BNF

    Format-A Bi-Directional Network Interface

  • RU-BNFP

    Format-A Bi-Directional Network Interface

  • RU-FN

    Format-A to Network Interface

  • RU-FNP

    Format-A to Network Interface

  • RU-LB2

    Line-Level Bi-Directional Network Interface

  • RU-LB2P

    Line-Level Bi-Directional Network Interface

  • RU-LB4

    Line-Level Bi-Directional Network Interface

  • RU-LB4P

    Line-Level Bi-Directional Network Interface

  • RU-MLB2

    Mic/Line Bi-Directional Network Interface

  • RU-MLB2P

    Mic/Line Bi-Directional Network Interface

  • RU-MLB4

    Mic/Line Bi-Directional Network Interface

  • Mic/Line Bi-Directional Dante Interface

    RU-MLB4P

    Mic/Line Bi-Directional Network Interface

  • RU-NFD

    Network to Format-A Interface/Distributor

  • RU-NL2

    Network to Line Level Interface

  • RU-NL2P

    Network to Line Level Interface

  • RU-NL4

    Network to Line Level Interface

  • RU-NL4P

    Network to Line Level Interface

Format-A® Distributors
  • RU-TPDA

    Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

  • RU-TPS4A

    Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

VCAs & Related Products
  • RU-VCA6A

    Digitally Controlled Attenuators

  • ST-VCA3

    Voltage Controlled Amplifier

Processing
  • ST-LEQ1

    Loudness Equalizer - Use with VCA

Related Products

Rack-Up® Mounting Accessories
  • UC-2R

    Double Wide RACK-UP Enclosure

  • WDG1R

    Table Top "Wedge" Chassis

  • UC-1R

    RACK-UP Enclosure

  • RU-RA3R

    Rack adapter for RACK-UP series

  • RU-HRA1

    10.4" Rack Mount for 1 RACK-UP Series Product

  • RU-SMA1

    RACK-UP Mounting Plate - Mounts any RACK-UP module in a cabinet or other flat surface

  • RU-BR1

    Mounting Bracket for RACK-UP Series

General Wiring Accessories
  • RC-1UR

    19" Universal Rack Chassis

DIN Rail Mounting Accessories

Dimensions

RU-NFDP

Downloads

DocumentsFormat
DatasheetPDF
CAD FilesUnitsSizeFormat
Engineering Functional BlockAmerican KBDXF
Panel Diagram - FrontAmerican KBDXF
Panel Diagram - RearAmerican KBDXF
Panel Diagram - FrontMetric KBDXF
Panel Diagram - RearMetric KBDXF
High Res ImagesFormat
ru-nfdp.zipTIF
Declaration of Conformity
Download

Diagrams

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink
Shopping cart close