RDL®

ST-UMX3

3x1 Universal Audio Mixer - 3 microphone or line inputs x 1 microphone or line output

SKU: ST-UMX3
  • Audio Mixing with Up To Three Inputs
  • Switch-Selectable Mic or Line Inputs
  • Switch-Selectable Mic or Line Output
  • Add Additional Microphone or Line Level Inputs to an Existing Mixer
  • Combine Signals of Different Level, Impedance, or Balanced /Unbalanced Configuration
  • Recommended Power Supply ( Not Included )
    PS-24AS (USA)PS-24AX (International)
    Category:

    Description

    The ST-UMX3 is a three-channel audio mixer for combining mic-level or line-level signals to a single output. A MIC/LINE switch is provided for each input. A separate MIC/ LINE switch selects the output level. Each input features a separate preamplifier circuit, which isolates it from the other inputs. An audio taper single turn gain adjustment is provided for each of the three input preamps. Signals from the three preamps are actively summed and fed to the output amplifier which includes an RDL® dual-LED VU meter.

    Each input level is set while observing the LED output level meter. The dual-LED output meter follows standard VU ballistics. The intensity of the green LED progresses from minimum at -11 dBu to full intensity at +4 dBu.

    The flexibility of switching each input and the output between MIC or LINE allows installers to address a wide variety of mixing solutions with only one product type.

    Specifications

    Inputs (3):Mic: 600 Ω; Line: 50 kΩ, balanced
    NOTE: MIC INPUTS ON ST-UMX3 ARE NOT PROTECTED AGAINST PHANTOM VOLTAGE. USE THE ST-MPA24 or ST-MPA48 MIC PHANTOM ADAPTER.
    Maximum Input Signal:Mic: -18 dBu; Line: +25 dBu
    Gain (each input):Mic: Adjustable from OFF to 60 dB
    Line: Adjustable from OFF to 21 dB
    Output:150 Ω balanced; 75 Ω unbalanced
    Output Signal:Mic: 50 dB below line level
    Line: +4 dBu nominal
    THD+N:< 0.006%
    IMD:Mic (@ 50 dB gain): < 0.04%
    Line: < 0.008%
    Freq. Response:Mic: 50 Hz to 100 kHz (± 1 dB)
    Line: 10 Hz to 100 kHz (± 0.05 dB)
    Noise (each input):Mic: < -70 dB (50 dB gain)
    Line: 60 dB
    Line: > 50 dB, (50 to 120 Hz)
    Ambient Operating Environment:0° C to 55° C
    Power Requirement:GROUND-REFERENCED, 24 Vdc @ 55 mA
    Package Type:Cardboard Box
    Package Dimensions:2 x 2 x 4 in.
    Shipping Weight:0.175 lbs.
    WEEE weight:0.12 lbs.
    Tariff code:8543.70.9860

    Related Products

    Mixing
    • EZ-MX4L

      Stereo Line-Level Audio Mixer - 4X1

    • EZ-MX4ML

      Mic and Stereo Line Audio Mixer - 4X1

    • FP-MX3R

      Remote Controlled Line-Level Mixer

    • FP-MX4

      4 Channel Audio Mixer - Microphone or line input and output

    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    • RU-MX4

      Professional 4 Channel Microphone/Line Mixer with Phantom Power - Microphone and line output

    • RU-MX4L

      Professional 4 Channel Line Level Mixer - Microphone and line Output

    • RU-MX4LT

      Professional 4 Channel Line Level Mixer with Transformer - Microphone and line output

    • 4 Channel Mixer

      RU-MX4T

      Professional 4 Channel Microphone/Line Mixer with Phantom Power & Transformer - Microphone and line output

    • RU-MX5ML

      5 Channel Mic/Line Audio Mixer with Phantom Power

    • ST-MX2

      2 Channel Audio Mixer - Microphone or line input and output

    • ST-MX3

      3 Channel Audio Mixer - Line input and output

    • TX-MX2R

      Audio Mixer / Distribution Amplifier

    Format-A® Mixers
    • FP-TPX3A

      Format-A Twisted Pair Remote Controlled Mixer

    Microphone Products
    • ST-MPA48

      Dual Microphone Phantom Adapter - 48 V

    Related Products

    STICK-ON® Mounting Accessories
    • STR-H6A

      10.4" Rack Mount for 6 STICK-ON Series Products

    • ST-PBR4

      STICK-ON Mounting Bracket

    • ST-RRB1

      Rear rack rail mounting kit for any STICK-ON module

    • SMK-12

      STICK-ON Mounting Plate

    • STR-19A

      STICK-ON Series 19" Racking System - 12 modules

    • SR-12A

      STICK-ON Series 19" Mounting Rack - 12 modules

    • STR-19B

      STICK-ON Series 19" Racking System - 10 modules

    • SR-10

      STICK-ON Series 19" Mounting Rack - 10 modules

    General Mounting Accessories
    • DMK-5

      Detachable Mounting Kit for RDL Modules

    • SR-4

      STICK-ON Series Mounting Rack - 7 modules

    • MB-1

      Mounting Kit - RU, ST and TX Series

    TX™ Mounting Accessories
    • MB-1

      Mounting Kit - RU, ST and TX Series

    DIN Rail Mounting Accessories
    • DRA-35S

      STICK-ON DIN Rail Adapter - 1 module

    • DRA-35S6

      STICK-ON DIN Rail Adapter - 6 modules

    General Wiring Accessories
    • DTB

      STICK-ON® Series Detachable Terminal Block

    Dimensions

    ST-UMX3

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican3.97 KBDXF
    Panel Diagram - EndAmerican11.9 KBDXF
    Panel Diagram - FrontAmerican70.88 KBDXF
    Panel Diagram - EndMetric11.95 KBDXF
    Panel Diagram - FrontMetric70.98 KBDXF
    High Res ImagesFormat
    st-umx3.zipTIF
    Declaration of Conformity
    Download

    Diagrams

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close