RDL®

AV-XMN4

Microphone to Dante Network Interface

SKU: AV-XMN4
  • Dante Network Interface for Four Audio Mic Inputs
  • Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
  • 48 V Mic Phantom (P48) on each input
  • Four XLR Front-Panel Inputs
  • Converts Four Standard XLR Mic Audio Sources to Dante Network Channels
  • Special Software Not Required for Module Setup
  • High Resolution 24 Bit Analog to Digital Conversion
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
  • Mounts on a Microphone Stand using an RDL SF-MSM1
  • Category:

    Description

    The AV-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the AV-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or condenser microphones. A dual-LED VU meter displays the level for each input to facilitate selection of the ideal gain range. P48 phantom voltage is supplied to each microphone input. The AV-XMN4 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance.

    The AV-XMN4 may be powered from an external 24 Vdc power supply, available separately. The AV-XMN4 is equipped to operate from a PoE enabled network switch. The AV-XMN4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-XMN4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

    The AV-XMN4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.

    Specifications

    Network Connector:RJ45 Neutrik® etherCON®
    Digital Audio Ethernet Protocol:Dante
    Transmission Rate:100 Mbps
    Sample Rates Supported:44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
    Bit Depth Supported:24 bits
    Audio Operating Level:-20 dBFS = +4 dBu
    Reference Level:0 dBFS = +24 dBu
    Inputs (4):XLR (female)
    Gain:Mic: 40 dB (LO), 48 dB (MED), 62 dB (HI); front-panel selectable
    Input Level (for +4 dBu/-20 dBFS):Mic: -36 dBu (LO), -44 dBu (MED), -58 dBu (HI)
    Input Level (maximum):Mic: -16 dBu (LO), -24 dBu (MED), -38 dBu (HI)
    Input Impedance:> 2.5 kΩ
    Phantom Power:P48, 48 Vdc
    Standard for Phantom:IEC 61938: 2013
    Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
    Equivalent Input Noise:-130 dBu (62 dB gain); -132 dBu A-Weighted
    Noise below -20 dBFS (20 to 20 kHz):Mic: < -72 dB (LO), < -72 dB (MED), < -68 dB (HI)
    THD+N: 65 dB (50 Hz to 120 Hz)
    Crosstalk:Below Noise Floor (20 Hz to 20 kHz at operating level, any input to any input, max. mic gain)
    Indicators (11):Ethernet Link and Speed (2, rear panel); Sync (front panel); dual-LED VU meter (8 LED, front panel)
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:PoE Class 0, IEEE 802.3af, or 24 Vdc @ 500 mA, Ground-referenced
    Specification Conditions:Gain/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain
    Dimensions:5.19" (13.18 cm) W; 1.68" (4.27 cm) H; 5.97" (15.16 cm) D
    Package Type:Cardboard Box
    Package Dimensions:7 x 4.375 x 2.25 in.
    Shipping Weight:1.79 lbs.
    WEEE weight:1.56 lbs
    Tariff code:8543.70.9100

    Related Products

    Dante™
    • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

      DD-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DD-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

      DD-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • White wall-mounted 4x4 Dante interface

      DD-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DD-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • DDB-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DDB-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • DDS-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DDS-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • FP-NML2

      Network to Mic/Line Interface

    • FP-NML2P

      Network to Mic/Line Interface

    • FP-NML2V

      Network to Mic/Line Interface with VCA

    • FP-NML2VP

      Network to Mic/Line Interface with VCA

    • RU-BNF

      Format-A Bi-Directional Network Interface

    • RU-BNFP

      Format-A Bi-Directional Network Interface

    • RU-FN

      Format-A to Network Interface

    • RU-FNP

      Format-A to Network Interface

    • RU-LB2

      Line-Level Bi-Directional Network Interface

    • RU-LB2P

      Line-Level Bi-Directional Network Interface

    • RU-LB4

      Line-Level Bi-Directional Network Interface

    • RU-LB4P

      Line-Level Bi-Directional Network Interface

    • RU-MLB2

      Mic/Line Bi-Directional Network Interface

    • RU-MLB2P

      Mic/Line Bi-Directional Network Interface

    • RU-MLB4

      Mic/Line Bi-Directional Network Interface

    • Mic/Line Bi-Directional Dante Interface

      RU-MLB4P

      Mic/Line Bi-Directional Network Interface

    • RU-NFD

      Network to Format-A Interface/Distributor

    • RU-NFDP

      Network to Format-A Interface/Distributor

    • RU-NL2

      Network to Line Level Interface

    • RU-NL2P

      Network to Line Level Interface

    • RU-NL4

      Network to Line Level Interface

    • RU-NL4P

      Network to Line Level Interface

    • Bidirectional Unbalanced Stereo Dante Interface

      SF-BNC2

      Bidirectional Unbalanced Stereo Audio Network Interface

    • SF-DN4

      Digital Audio to Network Interface

    • SF-ND2

      Network to Digital Audio Interface

    • SF-NH1

      Network to Stereo Headphone Amplifier

    • SF-NL2

      Network to Audio Interface

    • SF-NP40D

      Network to 40 W Stereo Power Amplifier

    • SF-UN1

      USB to Dante Network Interface

    Power Amplifiers
    • SF-NP40D

      Network to 40 W Stereo Power Amplifier

    Dimensions

    AV-XMN4

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican KBDXF
    Panel Diagram - FrontAmerican KBDXF
    Panel Diagram - RearAmerican KBDXF
    Panel Diagram - FrontMetric KBDXF
    Panel Diagram - RearMetric KBDXF
    High Res ImagesFormat
    av-xmn4.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close