RDL®

AV-NH1

Network to Stereo Headphone Amplifier

SKU: AV-NH1
  • Converts Two Dante Network Audio Signals to a Stereo Headphone
  • Output on Professional Quality 3.5 mm stereo MINI Jack or ¼” Jack
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Front-Panel Output Level Control
  • Special Software Not Required for Module Setup
  • Exceptional Low-Noise and Low-Distortion Performance
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
  • Mounts on a Microphone Stand using an RDL SF-MSM1
  • Category:

    Description

    The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The outputs connect through a stereo 3.5 mm Mini-jack or ¼” (6.35 mm) jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The AV-NH1 is a professional grade product for studio quality fidelity and low noise performance.

    The AV-NH1 may be powered from an external 24 Vdc power supply, available separately. The AV-NH1 is equipped to operate from a PoE enabled network switch. The AV-NH1 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NH1, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

    The AV-NH1 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.

    Specifications

    Network Connector:RJ45 Neutrik® etherCON®
    Digital Audio Ethernet Protocol:Dante
    Transmission Rate:100 Mbps
    Sample Rates Supported:44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
    Bit Depth Supported:24 bits
    Reference Level:0 dBFS = 150 mW into 100 Ω
    Outputs (2):Mini-jack or ¼” Jack, Stereo (L and R)
    Output Level (maximum):0 dBFS = 150 mW into 100 Ω
    Output Impedance:< 50 Ω
    Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
    THD+N:< 0.05% (20 Hz to 20 kHz, -20 dBFS); 0.015% at 1 kHz (typ)
    Noise:< -75 dB (below -20 dBFS); < -95 (below 0 dBFS)
    Crosstalk:< -80 dB (1 kHz, -20 dBFS)
    Headroom above -20 dBFS:20 dB
    Indicators (3):Ethernet Link and Speed (2, rear panel); Sync (front panel)
    Ambient Operating Environment:0° C to 50° C
    Power Requirement:PoE Class 0, IEEE 802.3af, or 24 Vdc @ 80 mA, Ground-referenced
    Specification Conditions:Gain/Level: ± 1 dB
    Dimensions:4.23" (10.74 cm) W; 1.68" (4.27 cm) H; 6.29" (15.98 cm) D
    Package Type:Cardboard Box
    Package Dimensions:7 x 4.375 x 2.25 in.
    Shipping Weight:1.36 lbs.
    WEEE weight:1.15 lbs.
    Tariff code:8543.70.9100

    Related Products

    Dante™
    • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

      DD-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DD-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

      DD-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • White wall-mounted 4x4 Dante interface

      DD-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DD-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • DDB-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DDB-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • DDS-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DDS-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • FP-NML2

      Network to Mic/Line Interface

    • FP-NML2P

      Network to Mic/Line Interface

    • FP-NML2V

      Network to Mic/Line Interface with VCA

    • FP-NML2VP

      Network to Mic/Line Interface with VCA

    • RU-BNF

      Format-A Bi-Directional Network Interface

    • RU-BNFP

      Format-A Bi-Directional Network Interface

    • RU-FN

      Format-A to Network Interface

    • RU-FNP

      Format-A to Network Interface

    • RU-LB2

      Line-Level Bi-Directional Network Interface

    • RU-LB2P

      Line-Level Bi-Directional Network Interface

    • RU-LB4

      Line-Level Bi-Directional Network Interface

    • RU-LB4P

      Line-Level Bi-Directional Network Interface

    • RU-MLB2

      Mic/Line Bi-Directional Network Interface

    • RU-MLB2P

      Mic/Line Bi-Directional Network Interface

    • RU-MLB4

      Mic/Line Bi-Directional Network Interface

    • Mic/Line Bi-Directional Dante Interface

      RU-MLB4P

      Mic/Line Bi-Directional Network Interface

    • RU-NFD

      Network to Format-A Interface/Distributor

    • RU-NFDP

      Network to Format-A Interface/Distributor

    • RU-NL2

      Network to Line Level Interface

    • RU-NL2P

      Network to Line Level Interface

    • RU-NL4

      Network to Line Level Interface

    • RU-NL4P

      Network to Line Level Interface

    • Bidirectional Unbalanced Stereo Dante Interface

      SF-BNC2

      Bidirectional Unbalanced Stereo Audio Network Interface

    • SF-DN4

      Digital Audio to Network Interface

    • SF-ND2

      Network to Digital Audio Interface

    • SF-NL2

      Network to Audio Interface

    • SF-NP40D

      Network to 40 W Stereo Power Amplifier

    • SF-UN1

      USB to Dante Network Interface

    • SF-XMN4

      Microphone to Network Interface

    Dante™
    • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

      DD-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DD-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

      DD-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • White wall-mounted 4x4 Dante interface

      DD-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DD-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • DDB-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDB-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DDB-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • DDS-BN22

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN2M

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN2ML

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

      Customizable Text

    • DDS-BN31

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

      Customizable Text

    • DDS-BN40

      Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

      Customizable Text

    • FP-NML2

      Network to Mic/Line Interface

    • FP-NML2P

      Network to Mic/Line Interface

    • FP-NML2V

      Network to Mic/Line Interface with VCA

    • FP-NML2VP

      Network to Mic/Line Interface with VCA

    • RU-BNF

      Format-A Bi-Directional Network Interface

    • RU-BNFP

      Format-A Bi-Directional Network Interface

    • RU-FN

      Format-A to Network Interface

    • RU-FNP

      Format-A to Network Interface

    • RU-LB2

      Line-Level Bi-Directional Network Interface

    • RU-LB2P

      Line-Level Bi-Directional Network Interface

    • RU-LB4

      Line-Level Bi-Directional Network Interface

    • RU-LB4P

      Line-Level Bi-Directional Network Interface

    • RU-MLB2

      Mic/Line Bi-Directional Network Interface

    • RU-MLB2P

      Mic/Line Bi-Directional Network Interface

    • RU-MLB4

      Mic/Line Bi-Directional Network Interface

    • Mic/Line Bi-Directional Dante Interface

      RU-MLB4P

      Mic/Line Bi-Directional Network Interface

    • RU-NFD

      Network to Format-A Interface/Distributor

    • RU-NFDP

      Network to Format-A Interface/Distributor

    • RU-NL2

      Network to Line Level Interface

    • RU-NL2P

      Network to Line Level Interface

    • RU-NL4

      Network to Line Level Interface

    • RU-NL4P

      Network to Line Level Interface

    • Bidirectional Unbalanced Stereo Dante Interface

      SF-BNC2

      Bidirectional Unbalanced Stereo Audio Network Interface

    • SF-DN4

      Digital Audio to Network Interface

    • SF-ND2

      Network to Digital Audio Interface

    • SF-NL2

      Network to Audio Interface

    • SF-NP40D

      Network to 40 W Stereo Power Amplifier

    • SF-UN1

      USB to Dante Network Interface

    • SF-XMN4

      Microphone to Network Interface

    Power Amplifiers
    • SF-NP40D

      Network to 40 W Stereo Power Amplifier

    Dimensions

    AV-NH1

    Downloads

    DocumentsFormat
    DatasheetPDF
    CAD FilesUnitsSizeFormat
    Engineering Functional BlockAmerican KBDXF
    Panel Diagram - FrontAmerican KBDXF
    Panel Diagram - RearAmerican KBDXF
    Panel Diagram - FrontMetric KBDXF
    Panel Diagram - RearMetric KBDXF
    High Res ImagesFormat
    av-nh1.zipTIF
    Declaration of Conformity
    Download

    How To Buy

    Direct Dealer Program

    Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

    • Must be an A/V contractor, sound contractor or system integrator
    • Must possess a current resale certificate for your state
    Click here to submit a new direct dealer account inquiry

    Buy Online

    CompanyAddressPhoneLink
    Shopping cart close