RDL®

AV-NL4

Network to Audio Interface

SKU: AV-NL4
  • Converts Four Dante Network Audio Signals to Balanced Analog
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Each Output Switch-Selectable for Mic or Line Level
  • Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
  • Microphone Output Level is Attenuated 50 dB
  • Each Output is Protected Against Phantom Voltage up to 48 Vdc
  • Special Software Not Required for Module Setup
  • Exceptional Low-Noise and Low-Distortion Performance
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
  • Mounts on a Microphone Stand using an RDL SF-MSM1
Category:

Description

The AV-NL4 is a line-level interface that converts four Dante network audio channels to four balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The AV-NL4 is a professional grade product for studio quality fidelity and low noise performance.

Power for the AV-NL4 can be provided by an external 24 Vdc power supply, available separately. The AV-NL4 is also equipped to operate from a PoE enabled network switch. The AV-NL4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NL4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The AV-NL4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.

Specifications

Network Connector:RJ45 Neutrik® etherCON®-style
Digital Audio Ethernet Protocol:Dante
Transmission Rate:100 Mbps
Sample Rates Supported:44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
Bit Depth Supported:24 bits
Audio Operating Level:-20 dBFS = +4 dBu
Reference Level:0 dBFS = +24 dBu
Outputs (4):XLR (male)
Output Level (operating):+4 dBu nominal LINE level balanced; -45 dBu nominal MIC level (into 150 Ω)
Output Level (maximum):+24 dBu LINE level
Output Impedance:< 100 Ω balanced
Selector per output:Mic/Line
Frequency Response:20 Hz to 20 kHz (± 0.5 dB)
THD+N:< 0.1% (20 Hz to 20 kHz,+4 dBu/-20 dBFS); 0.015% at 1 kHz (typ)
Noise:< -75 dB (below +4 dBu); < -95 (below +24 dBu)
Crosstalk:Below Noise Floor (1 kHz, output to output); < -60 d5 dB (20 kHz)
Headroom above +4 dBu/-20 dBFS:20 dB
Indicators (3):Ethernet Link and Speed (2, rear panel); Sync (front panel)
Ambient Operating Environment:0° C to 50° C
Power Requirement:PoE Class 0, IEEE 802.3af, or 24 Vdc @ 150 mA, Ground-referenced
Specification Conditions:Gain/Level: ± 1 dB
Dimensions:5.19" (13.18 cm) W; 1.68" (4.27 cm) H; 5.97" (15.16 cm) D
Package Type:Cardboard Box
Package Dimensions:7 x 4.375 x 2.25 in.
Shipping Weight:1.77 lbs.
WEEE weight:1.525 lbs.
Tariff code:8543.70.9100

Related Products

Dante™
  • AV-LN4

    Line Level Audio to Network Interface

  • AV-NH1

    Network to Stereo Headphone Amplifier

  • 2 channel Dante Audio Interface

    AV-NL2

    Dante to Balanced Audio Interface

  • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

    DD-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DD-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

    DD-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • White wall-mounted 4x4 Dante interface

    DD-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DD-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • DDB-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DDB-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • DDS-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DDS-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • FP-NML2

    Network to Mic/Line Interface

  • FP-NML2P

    Network to Mic/Line Interface

  • FP-NML2V

    Network to Mic/Line Interface with VCA

  • FP-NML2VP

    Network to Mic/Line Interface with VCA

  • RU-BNF

    Format-A Bi-Directional Network Interface

  • RU-BNFP

    Format-A Bi-Directional Network Interface

  • RU-FN

    Format-A to Network Interface

  • RU-FNP

    Format-A to Network Interface

  • RU-LB2

    Line-Level Bi-Directional Network Interface

  • RU-LB2P

    Line-Level Bi-Directional Network Interface

  • RU-LB4

    Line-Level Bi-Directional Network Interface

  • RU-LB4P

    Line-Level Bi-Directional Network Interface

  • RU-MLB2

    Mic/Line Bi-Directional Network Interface

  • RU-MLB2P

    Mic/Line Bi-Directional Network Interface

  • RU-MLB4

    Mic/Line Bi-Directional Network Interface

  • Mic/Line Bi-Directional Dante Interface

    RU-MLB4P

    Mic/Line Bi-Directional Network Interface

  • RU-NFD

    Network to Format-A Interface/Distributor

  • RU-NFDP

    Network to Format-A Interface/Distributor

  • RU-NL2

    Network to Line Level Interface

  • RU-NL2P

    Network to Line Level Interface

  • RU-NL4

    Network to Line Level Interface

  • RU-NL4P

    Network to Line Level Interface

  • Bidirectional Unbalanced Stereo Dante Interface

    SF-BNC2

    Bidirectional Unbalanced Stereo Audio Network Interface

  • SF-DN4

    Digital Audio to Network Interface

  • SF-ND2

    Network to Digital Audio Interface

  • SF-NH1

    Network to Stereo Headphone Amplifier

  • SF-NL2

    Network to Audio Interface

  • SF-NP16E

    PoE+ Network to 16 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP35E

    PoE++ Network to 35 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP40D

    Network to 40 W Stereo Power Amplifier

  • SF-NP50A

    Network to 50 W Mono Audio Amplifier - 70 V or 100 V

  • SF-UN1

    USB to Dante Network Interface

  • SF-XMN4

    Microphone to Network Interface

Power Amplifiers
  • SF-NP16E

    PoE+ Network to 16 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP35E

    PoE++ Network to 35 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP40D

    Network to 40 W Stereo Power Amplifier

  • SF-NP50A

    Network to 50 W Mono Audio Amplifier - 70 V or 100 V

SysFlex™ Mounting Accessories
  • SF-UCB2

    Under Counter Bracket Pair for SysFlex® Products

Dimensions

AV-NL4

Downloads

DocumentsFormat
DatasheetPDF
CAD FilesUnitsSizeFormat
Engineering Functional BlockAmerican0DXF
Panel Diagram - FrontAmerican0DXF
Panel Diagram - RearAmerican0DXF
Panel Diagram - FrontMetric0DXF
Panel Diagram - RearMetric0DXF
High Res ImagesFormat
av-nl4.zipTIF
Declaration of Conformity
Download

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink
Shopping cart close