RDL®

TP-BN14

Networked Mic Input and Selectable Monitor Station

SKU: TP-BN14
  • Normal or Hot-Standby Operation from PoE
  • 2 Watt RMS Audio Amplifier
  • Selection from 3 or 4 Mono Dante Network Sources to a Stereo Headphone
  • Converts a Standard Mic Source to a Dante Network Channel
Recommended Power Supply
PS-24AS (USA)PS-24AX (International)
Category:

Description

Microphone to Network Section
Converts a Standard Mic Source to a Dante Network Channel
Mute Button Toggles Output On and Off or Provides Momentary Muting
No User or Installer Gain Adjustments are Required
Automatic Microphone Gain of 40 dB for Condenser Mics and 60 dB for Dynamic Mics
P48 Phantom is Provided on the Microphone Input
40 dB per Octave at 100 Hz Low-Cut Filter Set by Installer

Network to Headphone Section
Selection from 3 or 4 Mono Dante Network Sources to a Stereo Headphone
Single-Button Selection for Each Source with LED Indication
Upper Button Selects “OFF” or Speaker Source, Set by Installer
Output on Professional Quality 3.5 mm Stereo MINI Jack
Display is Bright During Selection, Dims After Selection
Front-Panel Output Level Control

Network to Speaker Section
2 Watt RMS Audio Amplifier
Compressor/Limiter Prevents Clipping
Amplifier Gain Adjustment is Accessible through the Chassis Bottom - Set by the Installer

Common
Adjustment and Switch Settings on the Chassis Bottom are Set by the Installer
High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
LED Indicators Show Network Sync Status
Normal or Hot-Standby Operation from PoE

The TP-BN14 is a bidirectional Dante network interface for tabletop use. The unit provides a shock-mounted XLR microphone input with a mute button. A front-panel 2W amplified speaker provides monitoring of a specific audio mix.

The TP-BN14 provides a front-panel headphone Mini Jack with an associated four input source selector. LEDs associated with the input buttons indicate the selected source.

The front panel level control is a long-life potentiometer controlling a VCA. Audio does not pass through this control, assuring years of noise free level adjustment. The output amplifiers drive high or low impedance headphones delivering more than 90 mW into 100 Ohms. The headphone output may be used to listen to different language translations.

The TP-BN14 may be powered from a 24 Vdc power supply, available separately, or from PoE. It is used in meeting halls, conference rooms or courtrooms.

Specifications

Network Connector:RJ45 Ethercon style
Digital Audio Ethernet Protocol:Dante
Transmission Rate:100 Mbps
Sample Rates Supported:44.1 kHz, 48 kHz (default)
Bit Depth Supported:24 bits
Audio Operating Levels:-20 dBFS = +4 dBu
Mic Input to Network Interface Section
Input:Balanced, XLR
Gain:Automatic; 40 dB for condenser mics, 60 dB for dynamic mics
Input Level for +4 dBu (-20 dBFS):-56 dBu (dynamic), -36 dBu maximum; -36 dBu (condenser), -19 dBu maximum (unclipped), -14 dBu maximum (soft clipped)
Input Impedance:> 1 kΩ
Phantom Power:P48, 48 Vdc
Standard for Phantom:IEC 61938: 2013
Frequency Response:20 Hz to 20 kHz (± 0.75 dB) flat; with low cut filter: -1.5 dB @ 100 Hz, -8 dB @ 80 Hz, -38 dB @ 50 Hz, -60 dB @ 20 Hz
THD+N:< 0.1%
Noise below +4 dBu (-20 dBFS):< -70 dB
CMRR:> 70 dB (50 Hz to 120 Hz)
Muting:Mute Button Toggles Mic On or Off
Network to Headphone Output Section
Selectors (4):Momentary pushbuttons (1 for each channel); Upper Button Selects “OFF” or Speaker Source, Set by Installer
Indicators (4):Green LEDs, (indicates channel selected)
Level adjustment:Single-turn front-panel rotary level control
Output:Stereo mini jack, 90 mW per channel (into 100 ohms), Mono source
Frequency Response:20 Hz to 20 kHz (+0, -3 dB, into 100 Ohms)
THD+N:< 0.2% (1 kHz, 10 mW)
Noise:< -70 dB (below 10 mW with a -18 dBFS input)
Network to Speaker Output Section
Output power:2 Watts RMS
Frequency Range:150 Hz to 20 kHz, nominal
Common
Indicators (8):Headphone channel selected (4); Mic muted, Network Sync, Ethernet Link and Speed (2)
Power Connections (2):Power Jack; PoE
Ambient Operating Environment:0° C to 40° C
Power Requirement:24 Vdc @ 300 mA, or PoE
PoE:Class 0, IEEE 802.3af
Dimensions:6.95" (17.7 cm) W; 2.85" (7.24 cm) H; 7" (17.8 cm) D
Package Type:Cardboard Box
Package Dimensions:7 x 7 x 3 in.
Shipping Weight:3.26 lbs.
WEEE weight:2.97 lbs.
Tariff code:8543.70.9100

Related Products

Dante™
  • AV-LN4

    Line Level Audio to Network Interface

  • AV-NH1

    Network to Stereo Headphone Amplifier

  • 2 channel Dante Audio Interface

    AV-NL2

    Dante to Balanced Audio Interface

  • AV-NL4 Dante audio interface

    AV-NL4

    Network to Audio Interface

  • Metal microphone to Dante interface box

    AV-XMN4

    Microphone to Dante Network Interface

  • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

    DD-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DD-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

    DD-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • White wall-mounted 4x4 Dante interface

    DD-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DD-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • DDB-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DDB-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • DDS-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DDS-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • FP-NML2P

    Network to Mic/Line Interface

  • FP-NML2V

    Network to Mic/Line Interface with VCA

  • FP-NML2VP

    Network to Mic/Line Interface with VCA

  • RU-BNF

    Format-A Bi-Directional Network Interface

  • RU-BNFP

    Format-A Bi-Directional Network Interface

  • RU-FN

    Format-A to Network Interface

  • RU-FNP

    Format-A to Network Interface

  • RU-LB2

    Line-Level Bi-Directional Network Interface

  • RU-LB2P

    Line-Level Bi-Directional Network Interface

  • RU-LB4

    Line-Level Bi-Directional Network Interface

  • RU-LB4P

    Line-Level Bi-Directional Network Interface

  • RU-MLB2

    Mic/Line Bi-Directional Network Interface

  • RU-MLB2P

    Mic/Line Bi-Directional Network Interface

  • RU-MLB4

    Mic/Line Bi-Directional Network Interface

  • Mic/Line Bi-Directional Dante Interface

    RU-MLB4P

    Mic/Line Bi-Directional Network Interface

  • RU-NFD

    Network to Format-A Interface/Distributor

  • RU-NFDP

    Network to Format-A Interface/Distributor

  • RU-NL2

    Network to Line Level Interface

  • RU-NL2P

    Network to Line Level Interface

  • RU-NL4

    Network to Line Level Interface

  • RU-NL4P

    Network to Line Level Interface

  • Bidirectional Unbalanced Stereo Dante Interface

    SF-BNC2

    Bidirectional Unbalanced Stereo Audio Network Interface

  • SF-DN4

    Digital Audio to Network Interface

  • SF-ND2

    Network to Digital Audio Interface

  • SF-NH1

    Network to Stereo Headphone Amplifier

  • SF-NL2

    Network to Audio Interface

  • SF-NP16E

    PoE+ Network to 16 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP35E

    PoE++ Network to 35 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP40D

    Network to 40 W Stereo Power Amplifier

  • SF-NP50A

    Network to 50 W Mono Audio Amplifier - 70 V or 100 V

  • SF-UN1

    USB to Dante Network Interface

  • SF-XMN4

    Microphone to Network Interface

Power Amplifiers
  • SF-NP16E

    PoE+ Network to 16 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP35E

    PoE++ Network to 35 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP40D

    Network to 40 W Stereo Power Amplifier

  • SF-NP50A

    Network to 50 W Mono Audio Amplifier - 70 V or 100 V

Dante™
  • AV-LN4

    Line Level Audio to Network Interface

  • AV-NH1

    Network to Stereo Headphone Amplifier

  • 2 channel Dante Audio Interface

    AV-NL2

    Dante to Balanced Audio Interface

  • AV-NL4 Dante audio interface

    AV-NL4

    Network to Audio Interface

  • Metal microphone to Dante interface box

    AV-XMN4

    Microphone to Dante Network Interface

  • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

    DD-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DD-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • White Wall-Mounted Bi-Directional Mic/Line Dante Interface

    DD-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • White wall-mounted 4x4 Dante interface

    DD-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DD-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • DDB-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDB-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DDB-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • DDS-BN22

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN2M

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN2ML

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 2 x 2

    Customizable Text

  • DDS-BN31

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 4

    Customizable Text

  • DDS-BN40

    Wall-Mounted Bi-Directional Mic/Line Dante Interface 4 x 2

    Customizable Text

  • FP-NML2P

    Network to Mic/Line Interface

  • FP-NML2V

    Network to Mic/Line Interface with VCA

  • FP-NML2VP

    Network to Mic/Line Interface with VCA

  • RU-BNF

    Format-A Bi-Directional Network Interface

  • RU-BNFP

    Format-A Bi-Directional Network Interface

  • RU-FN

    Format-A to Network Interface

  • RU-FNP

    Format-A to Network Interface

  • RU-LB2

    Line-Level Bi-Directional Network Interface

  • RU-LB2P

    Line-Level Bi-Directional Network Interface

  • RU-LB4

    Line-Level Bi-Directional Network Interface

  • RU-LB4P

    Line-Level Bi-Directional Network Interface

  • RU-MLB2

    Mic/Line Bi-Directional Network Interface

  • RU-MLB2P

    Mic/Line Bi-Directional Network Interface

  • RU-MLB4

    Mic/Line Bi-Directional Network Interface

  • Mic/Line Bi-Directional Dante Interface

    RU-MLB4P

    Mic/Line Bi-Directional Network Interface

  • RU-NFD

    Network to Format-A Interface/Distributor

  • RU-NFDP

    Network to Format-A Interface/Distributor

  • RU-NL2

    Network to Line Level Interface

  • RU-NL2P

    Network to Line Level Interface

  • RU-NL4

    Network to Line Level Interface

  • RU-NL4P

    Network to Line Level Interface

  • Bidirectional Unbalanced Stereo Dante Interface

    SF-BNC2

    Bidirectional Unbalanced Stereo Audio Network Interface

  • SF-DN4

    Digital Audio to Network Interface

  • SF-ND2

    Network to Digital Audio Interface

  • SF-NH1

    Network to Stereo Headphone Amplifier

  • SF-NL2

    Network to Audio Interface

  • SF-NP16E

    PoE+ Network to 16 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP35E

    PoE++ Network to 35 W Mono Audio Amplifier - 70 V or 100 V

  • SF-NP40D

    Network to 40 W Stereo Power Amplifier

  • SF-NP50A

    Network to 50 W Mono Audio Amplifier - 70 V or 100 V

  • SF-UN1

    USB to Dante Network Interface

  • SF-XMN4

    Microphone to Network Interface

Dimensions

TP-BN14

Downloads

DocumentsFormat
DatasheetPDF
High Res ImagesFormat
tp-bn14_front.zipTIF
Declaration of Conformity
Download

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink
Shopping cart close