RDL®

DB-TPS2AM

Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-jack in

SKU: DB-TPS2AM
  • Mini-jack -10 dBV Stereo Line Input Summed to Mono
  • MIC Feeds Pair A; Mini-jack Feeds Pair B
  • Remote Powering through Twisted Pair Cable
  • Fused Local Power Feeds all Connected Modules
  • Local Power Input on Terminal Block
  • Blue LED Indicates Module is Powered
  • Utilizes Two Format-A Pairs
  • Studio-Quality Precision Active Balanced Circuitry
How to Customize
Recommended Power Supply ( Not Included )
PS-24AS (USA)PS-24AX (International)

Description

The D SERIES-TPS2AM modules are two-pair audio sending modules compatible with RDL Format-A twisted pair products. These modules are designed to be mounted in wall boxes, cabinets or other enclosures that allow users to connect audio sources. The -TPS2AM models mount in RDL WB-1U and WB-2U wall boxes, or in standard U.S. electrical boxes. The D-TPS2AM features a white front-panel laminate with gray lettering that matches RDL Decora©-style remote controls. The DB-TPS2AM features a black front-panel laminate. The DS-TPS2AM is constructed of stainless steel to coordinate with RDL Decora-style stainless steel remote controls in commercial/industrial installations.

APPLICATION: The D SERIES-TPS2AM modules features an XLR microphone input and a stereo Mini-jack input summed to mono. The unbalanced Mini-jack inputs are designed to receive standard -10 dBV consumer level signals. The microphone input provides 24 Vdc IEC phantom voltage and accepts both dynamic and condenser microphone signals. The input signals are amplified using studio-quality preamplifiers optimized for normal operating levels. A rear-panel GAIN switch is provided to set the amplification of the microphone preamplifier. This switch is normally set by the installer for NORM (normal) gain. If consistently low mic levels are expected, this switch may be set to the HIGH gain position. The pre-amplified microphone source is routed to pair A. The buffered Mini-jack input is routed to output cable pair B.

These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. The -TPS2AM modules have a second RJ45 jack for an input cable. One single-pair sender may be chained with the -TPS2AM. A single-pair sender must be set to feed pair C if it is connected together with the -TPS2AM. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.

The D SERIES-TPS2AM may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block. Local power connected to the module is also fed to all connected remote modules. The -TPS2AM may be remotely powered through the twisted pair cable from any other module, signal distributor or RDL power inserter connected to the same twisted pair cable. Module power is indicated by a front-panel LED.

RDL FORMAT-A features superior audio performance that rivals or exceeds shielded wiring. Design simplicity, ease of installation, unsurpassed flexibility, automatic fused power, exceptional hum rejection, low noise, and low distortion provide designers and installers the optimum choice in economical twisted pair products.

These modules drive only two cable pairs, therefore they accept a signal and power from one mic-level or line-level Format-A single-pair sender. The -TPS2AM modules have a second RJ45 jack for an input cable. One single-pair sender may be chained with the -TPS2AM. A single-pair sender must be set to feed pair C if it is connected together with the -TPS2AM. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.

Specifications

Inputs (3):Mic: 1.2 kΩ Balanced with IEC 24 Vdc Phantom; Line (left and right): 10 kΩ Unbalanced
Input Connectors (2):XLR female with gold contacts (1); Mini-jack (1)
Input Level:Mic: -45 to -65 dBu Balanced; Maximum: -40 dBu (HIGH Gain), -28 dBu (NORM Gain); Line: -10 dBV Unbal.; +8 dBV Max
Format-A Signal Pairs Used (2):A (Mic); B (Unbal Line inputs, summed to mono)
Gain:Mic: 50 dB (NORM) or 63 dB (HIGH), Switch-selectable on rear panel; Line: 12 dB
Output:RDL TP Format-A
Output Connection:RJ45
Frequency Response:Mic: 100 Hz to 30 kHz (+/- 1 dB); integral low-cut filter -10 dB @ 30 Hz; Line: 20 Hz to 50 kHz (+/- 0.5 dB)
THD+N:Mic: < 0.1% (80 Hz to 20 kHz); Line: < 0.05% (20 Hz to 50 kHz); <0.005% (1 kHz)
Noise below +4 dBu:Mic: < -80 dB (NORM Gain), < -70 dB (HIGH Gain); Line: < -95 dB
Crosstalk:Line to Line: < 90 dB (1 kHz); < 75 dB (20 Hz to 20 kHz); Line to Mic (HIGH Gain): < 65 dB (1 kHz), < 60 dB (20 Hz to 20 kHz);
Line to Mic (NORM Gain):< 75 dB (1 kHz), < 70 dB (20 Hz to 20 kHz)
Headroom above +4 dBu:> 18 dB
CMRR:Mic: > 60 dB (HIGH Gain 50 Hz to 150 Hz), > 65 dB (NORM Gain 50 Hz to 150 Hz)
Indicator:Power In
Power Connections (2):Detachable terminal block; RJ45
Power Requirement:24 Vdc @ 65 mA plus connected loads
Dimensions:1.6" (4.06 cm) W; 4.11" (10.45 cm) H; 1.89" (4.8 cm) D
Mounting Box Minimum Depth:2.4" (6.1 cm)
Ambient Operating Environment:0° C to 55° C
WEEE Weight:0.245 lbs
Shipping Weight:0.39 lbs
Tariff Code:8543.70.9860

Related Products

Format-A® Receivers
  • D-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

    Customizable Text

  • D-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

    Customizable Text

  • D-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

    Customizable Text

  • DS-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp

    Customizable Text

  • DS-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs

    Customizable Text

  • DS-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

    Customizable Text

  • Format-A twisted pair receiver to balanced line output

    TX-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

  • TX-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

  • TX-TPR6A

    Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

Format-A® Senders
  • D-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom

    Customizable Text

  • D-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

    Customizable Text

  • D-TPS2AM

    Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-jack in

    Customizable Text

  • D-TPSL1A

    Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

    Customizable Text

  • D-TPSL2A

    Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

    Customizable Text

  • DB-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

    Customizable Text

  • DB-TPSL1A

    Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

    Customizable Text

  • DB-TPSL2A

    Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

    Customizable Text

  • DS-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone input w pha

    Customizable Text

  • DS-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs

    Customizable Text

  • DS-TPS2AM

    Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-jack in

    Customizable Text

  • DS-TPSL1A

    Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

    Customizable Text

  • DS-TPSL2A

    Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

    Customizable Text

  • TX-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

  • TX-TPS6A

    Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

Power Inserters / Breakout
  • FP-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • RU-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • TX-TP1PW

    Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through

Format-A® Mixers
  • FP-TPX3A

    Format-A Twisted Pair Remote Controlled Mixer

Mixing
  • FP-TPX3A

    Format-A Twisted Pair Remote Controlled Mixer

Format-A® Distributors
  • RU-TPDA

    Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

  • RU-TPS4A

    Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

Format A®
  • D-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

    Customizable Text

  • D-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

    Customizable Text

  • D-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

    Customizable Text

  • D-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom

    Customizable Text

  • D-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

    Customizable Text

  • D-TPS2AM

    Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-jack in

    Customizable Text

  • D-TPSL1A

    Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

    Customizable Text

  • D-TPSL2A

    Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

    Customizable Text

  • DB-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

    Customizable Text

  • DB-TPSL1A

    Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

    Customizable Text

  • DB-TPSL2A

    Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

    Customizable Text

  • DS-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp

    Customizable Text

  • DS-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs

    Customizable Text

  • DS-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

    Customizable Text

  • DS-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone input w pha

    Customizable Text

  • DS-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs

    Customizable Text

  • DS-TPS2AM

    Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-jack in

    Customizable Text

  • DS-TPSL1A

    Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

    Customizable Text

  • DS-TPSL2A

    Active Two-Pair Sender - Twisted Pair Format-A - XLR Microphone & Stereo RCA In

    Customizable Text

  • FP-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • FP-TPX3A

    Format-A Twisted Pair Remote Controlled Mixer

  • RU-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • RU-TPDA

    Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

  • RU-TPS4A

    Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

  • TX-TP1PW

    Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through

  • Format-A twisted pair receiver to balanced line output

    TX-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

  • TX-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

  • TX-TPR6A

    Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

  • TX-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

  • TX-TPS6A

    Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

Related Products

General Mounting Accessories
  • SMB-4B

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-3B

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-2B

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-1B

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • CP-4B

    Quadruple Cover Plate - black

  • CP-3B

    Triple Cover Plate - Black

  • DC-2B

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-3B

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-4B

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • CP-1B

    Single Cover Plate - Black

  • CP-2B

    Double Cover Plate - Black

  • DC-1B

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • CP-4S

    Quadruple Cover Plate - stainless steel

  • CP-4

    Quadruple Cover Plate - white

  • CP-4G

    Quadruple Cover Plate - gray

  • CP-3S

    Triple Cover Plate - stainless steel

  • CP-3G

    Triple Cover Plate - gray

  • CP-2S

    Double Cover Plate - stainless steel

  • CP-3

    Triple Cover Plate - white

  • CP-1S

    Single Cover Plate - stainless steel

  • DC-4G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-4W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-3G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-2G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-3W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-2W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-1G

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • DC-1W

    Desktop or Wall Mounted Chassis for Decora® Remote Controls and Panels

  • SMB-4G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-3G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-3W

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-1G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-2W

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-4W

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-2G

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • SMB-1W

    Surface Mount Boxes for Decora® Remote Controls and Panels

  • RM-D9

    19" Rack Mount for 9 Decora® Modules

  • RM-D3

    19" Rack Mount for 3 Decora® Modules

  • CP-2G

    Double Cover Plate - gray

  • CP-1G

    Single Cover Plate - gray

  • WB-2U

    Universal Wall Box - Double - Mounts RDL remote controls & wall plates

  • CP-2

    Double Cover Plate - white

  • WB-1U

    Universal Wall Box - Single - Mounts RDL remote controls & wall plates

  • CP-1

    Single Cover Plate - white

Dimensions

DB-TPS2AM

Downloads

DocumentsFormat
DatasheetPDF
CAD FilesUnitsSizeFormat
Engineering Functional BlockAmerican KBDXF
Panel Diagram - FrontAmerican KBDXF
Panel Diagram - RearAmerican KBDXF
Panel Diagram - FrontMetric KBDXF
Panel Diagram - RearMetric KBDXF
High Res ImagesFormat
db-tps2am.zipTIF
Declaration of Conformity
Download

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink
Shopping cart close