RDL®

SF-TPR24A

Line-Level Receiver

SKU: SF-TPR24A
  • Eight Separate Three-Pair Format-A Receiver Sections
  • Receives up to 24 Audio Channels
  • Three +4 dBu Balanced Outputs per Section
  • Detachable Terminal Block Outputs
  • Audio Outputs for All Three Pairs (A, B and C) per Section
  • Local Power Feeds all Modules Connected to INPUTs
  • Wiring Fault Protection by Automatic Resetting Fuse
  • Local Power Input on Terminal Block or dc Power Jack
  • Green LED per Section Indicates Validity of Module Remote Power
  • Studio-Quality Precision Active Balanced Circuitry

Description

The SF-TPR24A is an eight-section audio receiving chassis compatible with RDL Format-A twisted pair products. Each section receives up to three audio sources and provides three outputs corresponding to signal pairs A, B and C. A studio-quality buffer amplifier feeds +4 dBu balanced outputs through a detachable terminal block.

The SF-TPR24A features bridging inputs, allowing it to be connected to the LOOP OUT jack of other receivers. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products.

The SF-TPR24A may be powered directly from a 24 Vdc power supply using either the power jack or the detachable terminal block. Local power connected to the module is also fed to all modules connected to the eight INPUT RJ45 jacks. Power for each RJ45 connector is protected against wiring faults by an automatically resetting fuse. Front-Panel green LEDs indicate valid module power on each RJ45.

Specifications

Inputs (8):RDL Format-A
Input Connections:RJ45
Format-A Signal Pairs Used (3):A, B, C (per section)
Outputs (24):150 Ω Balanced
Output Connection:Detachable Terminal Block (Balanced)
Output Level:+4 dBu Bal. nominal, +22 dBu Max
Frequency Response:10 Hz to 50 kHz (± 0.1 dB)
THD+N:< 0.005%
Noise below +4 dBu:< 90 dB
Crosstalk:Below noise floor (20 Hz to 20 kHz, +4 dBu input)
Headroom above +4 dBu:> 18 dB
CMRR:> 80 dB (50 Hz to 150 Hz)
Indicators (8):Power (1 per RJ45)
Power Connections (2):Power Jack; Detachable Terminal Block
Ambient Operating Environment:0° C to 55° C
Power Requirement:24 Vdc @ 360 mA plus connected loads (1.6 A max)
Dimensions:8.74" (22.2 cm) W; 1.68" (4.27 cm) H; 5.78" (14.68 cm) D
Package Type:Cardboard Box
Package Dimensions:9.5" (24.1 cm) W; 2.25" (5.71 cm) H; 7" (17.8 cm) D
Shipping Weight:2.66 lbs.
WEEE weight:2.32 lbs.
Tariff code:8543.70.9860

Related Products

Format-A® Senders
  • D-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

    Customizable Text

  • D-TPS3A

    Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA in

    Customizable Text

  • DS-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - Stainless - Stereo RCA jack inputs

    Customizable Text

  • DS-TPS3A

    Active Three-Pair Sender - Twisted Pair Format-A - Stainless - XLR microphone & stereo

    Customizable Text

  • SF-TPRS12A

    Line-Level Sender / Receiver

  • SF-TPS24A

    Line-Level Sender

  • TX-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - Balanced line input

  • TX-TPS3A

    Active Three-Pair Sender - Twisted Pair Format-A - Balanced line inputs

  • TX-TPS6A

    Passive Single-Pair Sender - Twisted Pair Format-A - Balanced audio line input

Format-A® Receivers
  • D-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

    Customizable Text

  • D-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

    Customizable Text

  • DB-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

    Customizable Text

  • DS-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Stainless - XLR microphone/line outp

    Customizable Text

  • DS-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - Stainless - Stereo RCA jack outputs

    Customizable Text

  • DS-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Stainless - XLR & stereo RCA out

    Customizable Text

  • SF-TPRS12A

    Line-Level Sender / Receiver

  • Format-A twisted pair receiver to balanced line output

    TX-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - Balanced line output

  • TX-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - Balanced line outputs

  • TX-TPR6A

    Passive Single-Pair Receiver - Twisted Pair Format-A - Balanced audio line output

Power Inserters / Breakout
  • FP-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • RU-TP4PW

    Power Inserter - Twisted Pair - Four sets of outputs - Signal loop-through

  • TX-TP1PW

    Power Inserter - Twisted Pair - 1 set of outputs - Signal loop-through

Format-A® Distributors
  • RU-TPDA

    Active Distributor - Twisted Pair Format-A - RDL Format-A input to Four outputs

  • RU-TPS4A

    Active Sender / Distributor - Twisted Pair Format-A - Three audio inputs to Four outputs

Related Products

SysFlex™ Mounting Accessories
  • SF-UCB2

    Under Counter Bracket Pair for SysFlex® Products

  • SF-RA1

    SysFlex® Rack Adapter

Dimensions

SF-TPR24A

Downloads

DocumentsFormat
DatasheetPDF
CAD FilesUnitsSizeFormat
Panel Diagram - FrontAmerican0DXF
Panel Diagram - FrontMetric0DXF
Panel Diagram - RearAmerican0DXF
Panel Diagram - RearMetric0DXF
Engineering Functional BlockAmerican0DXF
High Res ImagesFormat
sf-tpr24a.zip TIF
Declaration of Conformity
Download

How To Buy

Direct Dealer Program

Becoming an RDL direct dealer is quick and easy. To become a direct dealer, your company must meet the following requirements:

  • Must be an A/V contractor, sound contractor or system integrator
  • Must possess a current resale certificate for your state
Click here to submit a new direct dealer account inquiry

Buy Online

CompanyAddressPhoneLink
Shopping cart close