RDL®

Menu
0 $0.00

Format A®

Home / Products / Format A®

Products that send, receive and distribute audio and composite video signals via Decora® and European modular style wall plates and rack/utility mounted modules

  • D-BT1A

    Wall-Mounted Bluetooth® Audio Format-A Interface

      • Bluetooth Audio Input for Installed Sound System
      • Intuitive Single Button Pairing with LED Status Indication
      • Special Software Not Required for Module Setup
      • Customize the Module ID Name and Programming Password through the Bluetooth Connection
      • Sends Received Bluetooth Audio to RDL Format-A Receivers
      • Mono Summed or Stereo Audio Input Mode is Switch-Selectable on Rear Panel
      • Rear-Panel Switch Selects which RJ45 Pair (A, B or C) is Fed in Mono Summed Mode
      • Daisy-Chain up to Three D SERIES-BT1A modules to One Format-A Receiver in Mono Mode
      • Remotely Powered through Twisted Pair Cable
      • Signal and Power Pair Pass-Through on RJ45 Jacks

  • D-HA1A

    Format-A Stereo Headphone Amplifier

    • Headphone Amplifier with User Level Control
    • Output on Standard Mini-Jack
    • Mounts in a Wall or Cabinet
    • Input and Power Connection on RJ45
    • Connects to Format-A Sender using Twisted-Pair Cable
    • Powered from RDL Twisted Pair Format-A Sender
    • RJ45 Loop-Thru for Connecting Additional Modules
    • Protected by Automatically Resetting Fuse
    • Decora® Design with All Steel Panel and Rear Enclosure

  • D-PSP1A

    Decora-Style Active Loudspeaker - Format-A

      • Exceptional Audio Quality for Ultra-Compact Size
      • 2 Watt RMS Audio Amplifier
      • Compressor/Limiter Prevents Clipping
      • Connects to Format-A Sender using Twisted-Pair Cable
      • Powered from RDL Twisted Pair Format-A Sender
      • Front-Panel Gain Adjustment
      • Acoustically Optimized Decora Enclosure
      • Fidelity Comparable to Larger Drivers
      • Hemispherical Dispersion Mounted In Wall or Flat Surface

  • D-TPA1A

    3.5 W Audio Power Amplifier

    • 3.5 Watt RMS Audio Amplifier into 8 Ohms
    • 6.5 Watt RMS Audio Amplifier into 4 Ohms
    • Output Drives 4 or 8 Ohm Speaker
    • Setting Level to Minimum Activates Energy-Saving Sleep Mode
    • High-Efficiency Class D Operation
    • VCA Level Adjustment for Scratch-Free Long Life
    • Input and Power Connection on RJ45
    • Connects to Format-A Sender using Twisted-Pair Cable
    • Powered from RDL Twisted Pair Format-A Sender
    • Speaker Output Connection on Detachable Terminal Block
    • Ultra-Compact All Metal Construction
    • Thermal and Short-Circuit Protection

  • D-TPR1A

    Active Single-Pair Receiver - Twisted Pair Format-A - XLR microphone/line output

    • Balanced Mic or Line Level XLR Output
    • Switch-Selectable Output Level on Rear Panel
    • Switch Selects which Pair (A, B or C) Feeds the Output
    • Signal and Power Pair Pass-through on RJ45s
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Daisy-Chain with Additional Format-A Receivers
    • Studio-Quality Precision Active Balanced Circuitry

  • D-TPR2A

    Active Two-Pair Receiver - Twisted Pair Format-A - stereo RCA jack outputs

    • Two Unbalanced -10 dBV Phono Jack Audio Outputs
    • L (Left) Output From Pair B; R (Right) From Pair C
    • Signal and Power Pair Pass-Through on RJ45s
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Daisy-Chain with Additional Format-A Receivers
    • Studio-Quality Precision Active Balanced Circuitry

  • D-TPR3A

    Active Three-Pair Receiver - Twisted Pair Format-A - XLR and stereo RCA outputs

    • Balanced Mic or Line Level XLR Output
    • Switch-Selectable Output Level on Rear Panel
    • Two Unbalanced -10 dBV Phono Jack Audio Outputs
    • XLR From Pair A; L From Pair B; R From Pair C
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Utilizes All Three Format-A Pairs
    • Studio-Quality Precision Active Balanced Circuitry

  • D-TPRX3A

    Three Input Format-A Source Selector

    • Remote Selection from 3 Sources that Correspond to 3 Format-A Pairs
    • Single-Button Selection for Each Source
    • LED Indication
    • Line-Level Balanced Output on Detachable Terminal Block
    • Display is Bright During Adjustment
    • Display Dims After Adjustment
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Studio-Quality Precision Active Balanced Circuitry
    • All-Metal Construction
    • Available in Stainless Steel, Black and White

  • D-TPS1A

    Active Single-Pair Sender - Twisted Pair Format-A - XLR microphone input with phantom

    • Balanced Microphone XLR Input with Phantom
    • Switch-Selectable Mic Gain on Rear Panel
    • Switch Selects which RJ45 Pair (A, B or C) is Fed
    • Signal and Power Pair Pass-Through on RJ45 Jacks
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Daisy-Chain with Single-Pair or Two-Pair Senders
    • Studio-Quality Precision Active Balanced Circuitry

  • D-TPS2A

    Active Two-Pair Sender - Twisted Pair Format-A - stereo RCA jack inputs

    • Two Unbalanced -10 dBV Phono Jack Audio Inputs
    • Left (L) Input Feeds Pair B; Right (R) Feeds Pair C
    • Signal and Power Pair Pass-Through on RJ45 Jacks
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Daisy-Chain with Single-Pair Senders
    • Studio-Quality Precision Active Balanced Circuitry

  • D-TPS2AM

    Active Two-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo Mini-Jack in

      • Mini-Jack -10 dBV Stereo Line Input Summed to Mono
      • MIC Feeds Pair A; Mini-jack Feeds Pair B
      • Remote Powering through Twisted Pair Cable
      • Fused Local Power Feeds all Connected Modules
      • Local Power Input on Terminal Block
      • Blue LED Indicates Module is Powered
      • Utilizes Two Format-A Pairs
      • Studio-Quality Precision Active Balanced Circuitry

  • D-TPS3A

    Active Three-Pair Sender - Twisted Pair Format-A - XLR microphone & stereo RCA in

    • Balanced Microphone XLR Input with Phantom
    • Switch-Selectable Mic Gain on Rear Panel
    • Two Unbalanced -10 dBV Phono Jack Line Inputs
    • MIC Feeds Pair A; L Feeds Pair B; R Feeds Pair C
    • Remote Powering through Twisted Pair Cable
    • Fused Local Power Feeds all Connected Modules
    • Local Power Input on Terminal Block
    • Blue LED Indicates Module is Powered
    • Utilizes All Three Format-A Pairs
    • Studio-Quality Precision Active Balanced Circuitry

  • D-TPS6A

    Passive Single-Pair Sender

    • Stereo Audio Input Combined to Mono Output
    • Input on Dual RCA Jacks
    • Switch Selects which RJ45 Pair (A, B or C) is Fed
    • Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
    • Passive Circuitry Does Not Require Power
    • Galvanic Isolation through a Studio-Quality Transformer
    • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders

  • D-TPS7A

    Passive Single-Pair Sender

    • Stereo Audio Input Combined to Mono Output
    • Input on Mini-Jack
    • Switch Selects which RJ45 Pair (A, B or C) is Fed
    • Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
    • Passive Circuitry Does Not Require Power
    • Galvanic Isolation through a Studio-Quality Transformer
    • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders

  • D-TPS8A

    Active Two-Pair Sender - Twisted Pair Format-A - Mini-Jack input

    • Unbalanced -10 dBV Mini-Jack Audio Input
    • Rear-panel RJ45 Input for Connecting Additional TPS8A Senders
    • Left (L) Input Feeds Pair B; Right (R) Feeds Pair C
    • Signal and Power Pair Pass-Through on RJ45 Jacks
    • Remote Powering through Twisted Pair Cable
    • Daisy-Chain with Single-Pair Senders
    • Studio-Quality Precision Active Balanced Circuitry

  • D-TPSL1A

    Active Single-Pair Sender - Twisted Pair Format-A - Mini-Jack & Stereo RCA In

      • Stereo Audio Input Combined to Mono Output
      • Input on Dual RCA Jacks or Mini-Jack
      • Switch Selects which RJ45 Pair (A, B or C) is Fed
      • Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks
      • Remote Powering through Twisted Pair Cable
      • Fused Local Power Feeds all Connected Modules
      • Local Power Input on Terminal Block
      • Blue LED Indicates Module is Powered
      • Daisy-Chain with Single-Pair or Two-Pair Format-A Senders
      • Studio-Quality Precision Active Balanced Circuitry
  • Main menu
Shopping cart close